Pickup assembly shown
Flexible pickup hose and metal dip tube accompany the photographed branch.
Photograph of the supplied FB-10X assembly. Confirm the material, connections and accessory scope for your requirement.
FROZENFIRE · FOAM MAKING BRANCHES
Foam Making Branch FB-10X with Pickup Tube
Higher nominal flow. Integrated pickup arrangement.
A 450 LPM low-expansion foam making branch, shown with a flexible pickup hose and metal dip tube for direct concentrate induction.
450 LPMPickup tube assemblyIS 2097
Discuss your requirement +91 7878 717 818- Nominal flow
- 450 LPM
- Operating pressure
- 5.5–7 bar
- Expansion ratio
- Up to 10:1
- Maximum jet throw
- Up to 24–25 m
Typical FB-10X catalogue values. Verify the selected configuration and supply conditions.
PRODUCT OVERVIEW
Foam application.
Considered by model.
The Frozenfire FB-10X is the higher-flow model in the catalogue’s self-inducing foam branch range, with a nominal discharge of 450 LPM. It produces aspirated low-expansion foam for flammable-liquid fire applications.
The photographed assembly includes a flexible concentrate pickup hose and metal dip tube. The catalogue supports self-inducing operation as well as supply from a premixed foam arrangement.
An operating pressure range of 5.5–7 bar and maximum jet throw of up to 24–25 m are listed as typical specifications. Confirm the complete configuration, concentrate and water supply when selecting the branch.
Two supply arrangements
Self-inducing operation or premixed foam solution, as configured.
Foam proportioning options
3% / 6% options, matched to the concentrate and application.
TECHNICAL SPECIFICATIONS
The details
for FB-10X.
Typical model specifications from the Frozenfire catalogue, revision 07/26, page 4.
Download series catalogue| Parameter | Detail |
|---|---|
| Product type | Low-expansion foam making branch pipe |
| Nominal flow | 450 LPM |
| Operating pressure | 5.5–7 bar |
| Foam expansion ratio | Up to 10:1 |
| Maximum jet throw | Up to 24–25 m |
| Foam induction | Self-inducing / premix compatible |
| Foam percentage | 3% / 6% |
| Inlet connection | 63 mm instantaneous / threaded |
| Body material | Aluminium alloy / SS 304 / SS 316 (optional) |
| Surface finish | Epoxy coated |
| Approximate weight | Approx. 4–6 kg |
| Standard listed in catalogue | IS 2097 |
Values apply to FB-10X. Material, inlet type, foam percentage and supplied accessories depend on the selected configuration.
CONSTRUCTION & COMPONENTS
Connect.
Induct. Aspirate.
Catalogue construction options for the foam making branch assembly.
| Parameter | Detail |
|---|---|
| Body options | Aluminium alloy / stainless steel |
| Induction tube | Stainless steel |
| Foam generation | Integrated air aspirating chamber and expansion tube |
| Pickup arrangement | Pickup connection; optional 1.5 m hose with dip tube |
| Inlet coupling | Instantaneous or threaded |
| Handling | Carrying handle |
| Protective finish | Anodized or epoxy-coated, depending on configuration |
WORKING PRINCIPLE
Water and concentrate.
Air-aspirated foam.
The branch is configured for self-induction or a premixed foam solution supply.
Water supply
Pressurized water enters the branch and establishes flow through the assembly.
Concentrate and air
The Venturi arrangement draws concentrate through a pickup tube, or the branch receives premixed foam solution. Air is drawn into the aspirating chamber.
Foam discharge
The discharge tube delivers low-expansion foam for the selected application. Foam and system conditions determine the resulting performance.
APPLICATIONS
Across industrial
foam applications.
Application areas described in the series catalogue.
- 01Petroleum storage and tank farms
- 02Fuel loading bays and refineries
- 03Chemical and solvent storage
- 04Airport fuel farms and hangars
- 05Marine terminals and dockyards
- 06Industrial plants and warehouses
INSPECTION & TESTING
Checks from
assembly to discharge.
Inspection and testing activities listed in the Frozenfire catalogue.
- 01Dimensional inspection
- 02Flow rate verification
- 03Foam induction test
- 04Foam expansion ratio test
- 05Throw distance test
- 06Leakage inspection
- 07Visual quality inspection
- 08Functional operational testing
PRODUCT CONFIGURATION
Specify the
complete assembly.
Confirm the body material, inlet type, concentrate and proportioning requirement. The photograph shows a pickup assembly; agree its hose length and inclusion with the quotation. The catalogue lists a 1.5 m hose with dip tube as optional.
For your enquiry
- Model and quantity
- Available water supply and required duty
- Body material and inlet connection
- Foam concentrate, percentage and pickup arrangement
DOCUMENTS & SUPPORT
Product literature.
Ready to reference.
Download the original series catalogue or request the details for your selected model.
Foam Making Branch Pipe
Original Frozenfire series catalogue
Original five-page catalogue with the FB-5X and FB-10X technical table, construction, applications and inspection details.
Download series catalogue Open PDFFB-10X enquiries
Configuration and product documentation
Share the model, quantity, connection and operating requirement. Our team can review the configuration and scope of supply.
Request technical detailsEXPLORE THE RANGE
More foam making branches.
01 · FB-5
Foam Making Branch FB-5
A red-finished foam making branch with a side carrying handle, aspirating openings and hose connection.
Photo collectionExplore
02 · FB-5X
Foam Making Branch FB-5X
A low-expansion foam making branch with a nominal flow of 225 LPM, self-inducing or premix operation and integrated shut-off control.
Specifications & PDFExplore
03 · FB-10
Foam Making Branch FB-10
A red-finished foam making branch with upper and lower carrying handles, a long discharge tube and lower air aspirating openings.
Photo collectionExplore