Two connections, one hydrant point
The twin-outlet body provides connections for two firefighting hose lines from a shared inlet.
Product photographs show a representative configuration. Confirm the selected material and connections with your quotation.
HYDRANT VALVES · TYPE B
Double Headed Hydrant Valve
Two outlets. Independent control.
A twin-outlet hydrant valve with independent handwheel control for each connection. Operate one hose line or both lines simultaneously from a single hydrant point.
Type BManual operation
Discuss your requirement +91 7878 717 818- Outlets
- 02Independent controls
- Outlet size
- 63 mmInstantaneous female
- Working pressure
- Up to 7 barCatalogue rating
- Hydrostatic test
- 24 barTest pressure
PRODUCT OVERVIEW
Two hose lines.
Independent control.
The double headed hydrant valve provides two independently controlled outlets in one assembly. Each outlet has its own handwheel, allowing one or both hose lines to operate from the same hydrant point.
This arrangement supports flexible hose deployment in industrial firewater networks. Each hose connects through a 63 mm instantaneous female coupling. The catalogue lists gunmetal or stainless steel construction with stainless steel stems and neoprene rubber washers.
Independent outlet control
A separate handwheel for each outlet allows one line or both lines to operate as required.
Instantaneous hose connection
Both 63 mm female coupling outlets support direct connection of compatible firefighting hose couplings.
Flexible hose deployment
The dual-line arrangement supports firefighting operations at industrial facilities with multiple hose requirements.
TECHNICAL SPECIFICATIONS
The details
that define the valve.
Typical specifications from the Frozenfire product catalogue, revision 07/2026.
WORKING PRESSUREUp to 7 bar
Download technical catalogue 24 bar is the hydrostatic test pressure. It is not the working pressure rating.
| Parameter | Detail |
|---|---|
| Valve arrangement | Double Headed Hydrant Valve |
| Standard / type | Type B |
| Number of outlets | 2 independently controlled outlets |
| Nominal inlet | 80 mm / 100 mm — typical catalogue options |
| Outlet connection | Each outlet: 63 mm instantaneous female coupling |
| Working pressure | Up to 7 bar |
| Hydrostatic test pressure | 24 bar |
| Body material | Stainless steel / gunmetal |
| Parts material | Stainless steel / gunmetal |
| Washers | Neoprene rubber |
| Finish | Red epoxy powder coating |
| Operation | Manual handwheel |
| Installation | Vertical hydrant stand post / landing valve |
The 80 mm / 100 mm inlet sizes are typical family options in the catalogue. Confirm the inlet size, connection dimensions and material for your selected valve before ordering.
MATERIALS & CONSTRUCTION
Built around
the waterway.
The body and bonnet house a manually operated spindle and valve seat. Material choices, sealing components and finish are listed below for configuration discussions.
Gunmetal / stainless steel options
Confirm the material in your quotation.
| Parameter | Detail |
|---|---|
| Body | Gunmetal / stainless steel |
| Bonnet | Gunmetal / stainless steel |
| Stem | Stainless steel |
| Valve seat | Gunmetal / stainless steel |
| Washers | Neoprene rubber |
| Handwheel | Cast iron |
| Outlet | Instantaneous female coupling |
| Finish | Red epoxy powder coated or painted |
The construction section of the catalogue allows a powder-coated or painted finish; its typical specification table lists red epoxy powder coating. Confirm the required finish with the selected configuration.
APPLICATIONS
Across demanding
industrial environments.
A twin-outlet arrangement for industrial and higher-hazard occupancies where two independently controlled hose connections are required.
- 01Refineries
- 02Petrochemical plants
- 03Tank farms
- 04Airports
- 05Marine facilities
- 06Power stations
- 07Heavy industries
- 08High-hazard occupancies
OPERATING PRINCIPLE
From connection to closure.
Each outlet has an individual handwheel. One or both outlets may be operated, subject to the firewater system’s available supply.
Connect
The valve is normally closed. Connect a compatible firefighting hose to the instantaneous female outlet.
Open
Rotating the handwheel lifts the valve disc from its seat, allowing pressurised water to pass through the outlet into the hose.
Close
Rotating the handwheel in the opposite direction returns the disc to its seat to stop the discharge.
This is an overview of the operating principle. Use the applicable site procedures for commissioning, operation and maintenance.
INSPECTION & MAINTENANCE
Keep every
connection ready.
The catalogue recommends periodic inspection of the body, operating mechanism, seals and hose connection.
01Body, outlet and identification
- Inspect the body for corrosion, cracks or physical damage.
- Check that the cap, chain and coupling are secure.
- Keep identification markings and operating instructions legible.
02Handwheel and spindle
- Operate the handwheel periodically to help prevent spindle seizure.
- Lubricate spindle threads with waterproof grease.
03Seals and leakage
- Check for leakage at the gland packing and outlet connections.
- Inspect the valve seat and replace worn seals if leakage occurs.
04Pressure testing
- Carry out pressure testing in accordance with the applicable fire protection standards and the site maintenance procedure.
DOCUMENTS & SUPPORT
Take the specification with you.
Use the original catalogue for your review and request configuration-specific documents from our team.
Fire Hydrant Valve catalogue
Single & double headed valves
Product description, construction, typical specifications, operating principle, maintenance and quality checks.
Download catalogueProject documentation
For your selected configuration
Discuss connection dimensions, drawings, material requirements and applicable product documentation for your project.
Request technical detailsALSO IN THIS RANGE
Explore the other hydrant valves.
Type AOne outlet. Direct control.
Single Headed Hydrant Valve
A compact, manually operated hydrant outlet valve for a single hose line. The handwheel controls water discharge through a 63 mm instantaneous female coupling.
- Outlet
- 1 × 63 mm
- Working pressure
- Up to 7 bar
UndergroundBelow ground. Ready to connect.
Underground Hydrant Valve
An underground hydrant valve with a cast iron body to IS 210, a 3″ NB flanged inlet and a gunmetal 2″ BS round threaded outlet.
- Inlet
- 3″ NB flanged
- Test pressure
- 23 kgf/cm²
SPECIFY YOUR REQUIREMENT
Let’s connect
the right details.
Share your product and quantity, required inlet connection, material preference and operating conditions. Include the installation and delivery location so our team can discuss your configuration.
Request a quotationFor a useful quotation
- 01Valve type and quantity
- 02Inlet size and connection details
- 03Body material and operating pressure
- 04Installation, documentation and delivery needs
Domestic supply & export
+91 7878 717 818