Water-powered airflow
A water-driven fan supplies the airflow needed for foam generation.
HX Mini catalogue configuration shown. Ducts, inductor material and optional construction are confirmed with your quotation.
FROZENFIRE · HIGH EXPANSION
HX Mini Foam Generator
Portable foam generation. Water-powered airflow.
A portable high expansion foam generator with an SS 304 housing, water-powered fan and matching 225 LPM inline inductor for the selected foam-system arrangement.
High expansionWater-powered fanPortable
Discuss your requirement +91 7878 717 818- Operating pressure
- 3.5bar
- Expansion
- Up to 1:250concentrate dependent
- Matching inductor
- 225LPM
- Body
- SS 304SS 316 optional
Expansion depends on the selected foam concentrate. The 225 LPM value identifies the matching inline inductor in the catalogue.
PRODUCT OVERVIEW
Foam solution.
Water-powered airflow.
The HX Mini combines a water-driven fan with foam-solution spray nozzles and a stainless-steel mesh to produce high-expansion foam. Its portable cylindrical assembly includes a carrying handle and tubular support legs for positioning at the selected installation.
The catalogue pairs the generator with a 225 LPM inline inductor and lists typical proportioning of 3% or 6%. Foam concentrate, proportioning and air supply must be matched to the application. The basic fan drive requires no electrical supply.
Portable stainless-steel assembly
SS 304 housing with a carrying handle and stable tubular supports; SS 316 is optional.
Duct arrangement
A polythene foam duct is listed, with an optional collapsible duct for smoke-exhaust service.
TECHNICAL SPECIFICATIONS
The model.
The materials.
The operating conditions.
Construction and technical information from this model’s original catalogue.
SELECTED MODELHX Mini
Download catalogue High expansion foam generator
| Parameter | Specification |
|---|---|
| Product | HX Mini Foam Generator |
| Type | High expansion foam generator |
| Body material | SS 304 stainless steel |
| Optional body material | SS 316, on request |
| Turbine material | Stainless steel |
| Solution nozzle material | Stainless steel / gun metal |
| Inline inductor material | Aluminium / stainless steel |
| Matching inductor size / flow | 63 mm / 225 LPM |
| Foam expansion ratio | Up to 1:250, depending on foam concentrate |
| Operating pressure | 3.5 bar |
| Water inlet | 2½″ instantaneous male coupling |
| Drive system | Water-powered fan |
| Foam duct | Polythene |
| Optional duct | Collapsible smoke-exhaust duct |
| Finish | Natural stainless steel |
| Installation | Portable |
| Application | Total-flooding fire protection, subject to system design |
| Typical proportioning | 3% / 6%, matched to the selected concentrate |
Typical catalogue data. Confirm concentrate compatibility, proportioning, available pressure and the complete duct / inductor arrangement for the selected installation.
CONSTRUCTION
The assembly
behind the discharge.
Component materials and arrangement from the selected product catalogue.
Housing & screen
SS 304 cylindrical housing, stainless-steel protective mesh and corrosion-resistant fasteners.
Fan & spray assembly
Stainless-steel turbine, balanced fan impeller and integrated stainless-steel / gun-metal solution nozzles.
Handling & access
Carrying handle, support legs and maintenance access cover. Confirm duct and inductor supply with the selected package.
OPERATION
Prepare the system.
Establish the foam discharge.
Catalogue guidance used with the approved fire-protection system procedures and selected foam concentrate.
- 01
Inspect & position
Inspect the housing, mesh, fan and inlet coupling. Position on a stable, level surface with the air intake clear and the discharge directed as required by the system plan.
- 02
Connect the equipment
Connect the water supply, matching foam proportioning equipment and selected duct arrangement. Check secure coupling engagement.
- 03
Establish the flow
Open the water supply slowly, allow the water-driven fan to operate and introduce compatible foam concentrate through the induction system.
- 04
Check foam discharge
Verify continuous foam generation and follow the approved response plan for the protected area.
- 05
Flush & drain
Stop concentrate induction and flush with clean water. Shut off the supply and relieve pressure before disconnecting; drain and inspect before storage.
CONFIGURATION & ENQUIRIES
Specify the complete
operating arrangement.
Confirm the generator, proportioning, connections and installation together.
Foam selection
The catalogue lists high-expansion, synthetic high-expansion, AFFF high-expansion and protein high-expansion concentrates where applicable. Confirm the exact formulation and required concentration.
Inductor & coupling
Specify the matching 225 LPM inline inductor and 63 mm / 2½″ connection arrangement. Confirm supplied accessories and available water pressure.
Material & duct
Select SS 304 or optional SS 316 construction. Confirm the polythene foam duct and whether the optional smoke-exhaust duct is required.
Discuss a configuration
Share the protected space, water supply, foam concentrate and concentration, inductor requirement, duct arrangement, material selection, quantity and delivery location.
APPLICATIONS
Selected for the hazard.
Integrated with the system.
Application areas identified in the catalogue. Final suitability depends on the hazard, concentrate and approved system design.
- 01Pump & compressor rooms
- 02Fuel storage & loading bays
- 03Ship engine rooms & cargo holds
- 04Marine pump compartments
- 05Offshore installations
- 06Aircraft hangars & maintenance bays
- 07Underground mines & conveyor tunnels
- 08Equipment & utility rooms
- 09Warehouses & basements
- 10Cable tunnels
- 11Chemical & paint storage
- 12Transformer rooms & manufacturing plants
INSPECTION & MAINTENANCE
Keep the air path clear.
Maintain the assembly.
Catalogue care intervals for the HX Mini. Follow the approved operating and maintenance procedure for the complete foam system.
01After every use
- Flush foam residue with clean water; clean the mesh and spray nozzles.
- Drain residual water and wipe the exterior dry before storage.
02Weekly inspection
- Inspect the housing and protective mesh for damage or blockage.
- Check smooth fan rotation, secure handle fastening and the inlet coupling.
03Monthly inspection
- Inspect the impeller for wear or corrosion and check nozzles for clogging.
- Check fasteners and support legs; lubricate applicable moving parts and verify operation under water flow.
04Annual maintenance
- Perform an operational test and check foam expansion performance.
- Inspect bearings, seals and gaskets, replace damaged screens or components and verify the assembly against manufacturer specifications.
05Storage
- Keep clean, dry and well ventilated. Protect the screen and equipment from dust and transport damage.
- Flush before long-term storage and avoid placing heavy objects on the housing.
DOCUMENTS & SUPPORT
The original catalogue.
Details for your project.
Download product literature, print this page or request supporting information for the selected configuration.
HX Mini Foam Generator
Original Frozenfire catalogue
HX Mini construction, technical specifications, compatible concentrates, operation, maintenance and storage.
Download catalogue Open PDFTechnical & project support
Product and project enquiries
Share the protected space, water supply, foam concentrate and concentration, inductor requirement, duct arrangement, material selection, quantity and delivery location.
Request technical detailsEXPLORE THE FAMILY
