Aspirating arrangement
A dedicated barrel for foam-solution discharge.
Product photograph shows a representative configuration. Confirm the selected material, size and connections with your quotation.
FROZENFIRE · Monitor accessories
Foam Barrel
Aspirated foam delivery from a dedicated barrel.
An aluminium aspirating foam barrel with 1750–3500 LPM catalogue flow, a threaded monitor connection and a 2.5 m PVC pickup hose with stainless-steel dip tube.
Aspirating type1750–3500 LPMAluminium
Discuss your requirement +91 7878 717 818PRODUCT OVERVIEW
The equipment.
Its application.
The Foam Barrel is an aspirating foam-discharge assembly for a compatible monitor and foam system. The barrel supports foam formation and delivery when supplied with the correct water flow and concentrate arrangement.
The catalogue lists threaded 63, 75 and 100 mm inlet options, a PVC pickup hose and stainless-steel dip tube. Match the selected connection, concentrate and proportioning duty to the project requirement.
Pickup assembly
A 2.5 m PVC hose with stainless-steel dip tube is described.
Finish options
Fire red or luminous yellow painted aluminium construction.
TECHNICAL SPECIFICATIONS
The details
for selection.
Specifications from the matching Frozenfire catalogue. Confirm the approved configuration for your project.
Download catalogue| Parameter | Specification |
|---|---|
| Equipment type | Aspirating foam barrel |
| Primary application | Foam-solution discharge |
| Material | Aluminium |
| Flow range | 1750–3500 LPM |
| Operating pressure | 7–10 bar |
| Inlet sizes | 63 / 75 / 100 mm |
| Mounting connection | Threaded inlet |
| Foam concentrate options | AFFF / AR-AFFF / fluorine-free foam; confirm system compatibility |
| Finish options | Luminous yellow / fire red painted |
| Foam pickup assembly | 2.5 m PVC hose with stainless-steel dip tube |
| Approximate weight | 5.5 kg |
Catalogue values describe the listed range. Confirm the final flow, pressure, inlet and concentrate compatibility for the selected barrel and monitor assembly.
CONSTRUCTION
Inside the
assembly.
Components described in the matching product catalogue.
| Parameter | Specification |
|---|---|
| Barrel | Aluminium aspirating assembly |
| Inlet | Threaded connection |
| Pickup hose | 2.5 m PVC |
| Dip tube | Stainless steel |
| Exterior | Fire red / luminous yellow painted |
APPLICATIONS
Specify for
the intended duty.
Application areas described in the catalogue. Final selection depends on the complete system and operating requirements.
- 01Oil & gas and petrochemical installations
- 02Refineries, tank farms and loading terminals
- 03Chemical and industrial facilities
- 04Marine, offshore and aviation facilities
OPERATION & INSPECTION
Prepare.
Inspect. Maintain.
Use the original catalogue and the instructions applicable to your selected assembly.
01Prepare the assembly
Inspect the barrel, pickup hose, dip tube, inlet and seals. Confirm secure mounting, unobstructed openings and the correct concentrate and water supply.
02Operate
Introduce the water supply gradually, then use the specified foam-induction arrangement. Monitor foam quality, connections and supply conditions throughout discharge.
03After foam use
Follow the shutdown procedure and flush all foam-contact passages, pickup hose and dip tube with clean water. Isolate and depressurise before disconnecting.
04Routine service
Inspect for deposits, corrosion, damaged seals or pickup-hose deterioration. Replace worn components and carry out a controlled functional check before returning to use.
DOCUMENTS & ENQUIRIES
Product literature.
Your next step.
Keep the original catalogue alongside the selected model and quotation.
Foam Barrel
Original Frozenfire catalogue
Specify your requirement
Include these details in your enquiry
- Required flow and available pressure at the nozzle
- Monitor outlet size, thread and mounting arrangement
- Water or foam duty, concentrate and proportioning arrangement
- Material, control configuration and quantity