Selectable flow
Model-specific settings from 500 to 2000 GPM at the reference pressure.
Product photograph shows a representative configuration. Confirm the selected material, size and connections with your quotation.
FROZENFIRE · Aqua Foam series
Variable Flow Aqua Foam Nozzle
Select the flow. Match the foam system.
A monitor-mounted nozzle with jet, spray and fog patterns and three variable-flow model references from 500 to 2000 GPM.
Variable flowJet / spray / fogThree models
Discuss your requirement +91 7878 717 818PRODUCT OVERVIEW
The equipment.
Its application.
The Variable Flow Aqua Foam Nozzle delivers water or compatible foam solution through a monitor assembly. The flow-control arrangement and pattern selection allow the chosen model to be set for the operating requirement.
The dedicated catalogue lists 75, 100 and 150 mm model sizes with separate GPM selections. Specify the flow settings, material, nozzle inlet and compatible foam proportioning system together.
Three patterns
Jet, spray and fog discharge described in the dedicated catalogue.
Material choice
Aluminium, gunmetal and stainless steel options with material-appropriate finishes.
TECHNICAL SPECIFICATIONS
The details
for selection.
Specifications from the matching Frozenfire catalogue. Confirm the approved configuration for your project.
Download catalogue| Parameter | Specification |
|---|---|
| Product type | Variable-flow Aqua Foam nozzle |
| Application medium | Water / compatible foam solution |
| Flow control | Selectable variable flow |
| Operating pressure | 7–10 bar |
| Discharge patterns | Jet / spray / fog |
| Material options | Aluminium / gunmetal / stainless steel |
| Inlet sizes in specification table | 75 / 100 mm |
| Additional model size | 150 mm in model table; confirm corresponding inlet arrangement |
| Finish | Natural polish for SS / gunmetal; hard-anodised aluminium |
| Foam compatibility | Selected concentrate and compatible proportioning system |
The dedicated catalogue specifies 7–10 bar operation. Select flow and inlet by model; confirm the 150 mm connection against the approved drawing. Throw, expansion, weight and maximum pressure require model-specific data.
MODEL SELECTION
Compare the
catalogue options.
Select the model reference with your required material, connection and operating arrangement.
On smaller screens, scroll across for all model details.
| Model | Size | Selectable flow rates | Reference pressure |
|---|---|---|---|
| FIL/AFN-V/75 | 75 mm | 500 / 750 GPM | 7 bar |
| FIL/AFN-V/100 | 100 mm | 500 / 750 / 1000 GPM | 7 bar |
| FIL/AFN-V/150 | 150 mm | 1000 / 1500 / 2000 GPM | 7 bar |
Settings are reproduced in GPM as supplied. Flow and foam performance depend on inlet pressure, concentrate, proportioning and operating conditions.
CONSTRUCTION
Inside the
assembly.
Components described in the matching product catalogue.
| Parameter | Specification |
|---|---|
| Body options | Aluminium / gunmetal / stainless steel |
| Flow arrangement | Variable-flow control mechanism |
| Discharge selection | Jet / spray / fog |
| Finish | Natural polish or hard anodising according to material |
APPLICATIONS
Specify for
the intended duty.
Application areas described in the catalogue. Final selection depends on the complete system and operating requirements.
- 01Oil & gas and petrochemical installations
- 02Refineries, tank farms and loading terminals
- 03Chemical and industrial facilities
- 04Marine, offshore and aviation facilities
OPERATION & INSPECTION
Prepare.
Inspect. Maintain.
Use the original catalogue and the instructions applicable to your selected assembly.
01After use
Flush thoroughly with clean water, operate the applicable controls to remove residue, then drain and wipe dry.
02Monthly inspection
Check the body, connections, fasteners and passages for damage, leakage or obstruction.
03Quarterly checks
Carry out the prescribed functional check, inspect seals and clean internal passages. Lubricate only where required with a compatible lubricant.
04Annual service
Inspect internal components and replace worn parts. Complete the prescribed flow, foam and pressure checks following service.
DOCUMENTS & ENQUIRIES
Product literature.
Your next step.
Keep the original catalogue alongside the selected model and quotation.
Variable Flow Aqua Foam Nozzle
Original Frozenfire catalogue
Specify your requirement
Include these details in your enquiry
- Required flow and available pressure at the nozzle
- Monitor outlet size, thread and mounting arrangement
- Water or foam duty, concentrate and proportioning arrangement
- Material, control configuration and quantity