Monitor-mounted delivery
Designed for high-volume water delivery through a compatible fire monitor.
Product photograph shows a representative configuration. Confirm the selected material, size and connections with your quotation.
FROZENFIRE · Super Stream series
Variable Flow Super Stream Nozzle
Selectable flow for the operating duty.
Variable-flow Super Stream / Master Stream nozzle with 500, 750 and 1000 GPM selections according to the chosen model.
Selectable flowTwo modelsMonitor mounted
Discuss your requirement +91 7878 717 818PRODUCT OVERVIEW
The equipment.
Its application.
The variable-flow Master Stream nozzle provides operator-selectable discharge for a compatible fire monitor. Its adjustment mechanism allows the model’s flow setting to be matched to the available supply and operating requirement.
The 75 model lists 500 / 750 GPM settings; the 100 model adds a 1000 GPM setting. Each model-table value is stated at 7 bar. Confirm any custom selection and the final inlet arrangement with the quotation.
Model-specific duty
Select the flow arrangement with the available pressure and water supply.
Inspectable construction
The waterway, seals and connection are accessible for routine inspection and service.
TECHNICAL SPECIFICATIONS
The details
for selection.
Specifications from the matching Frozenfire catalogue. Confirm the approved configuration for your project.
Download catalogue| Parameter | Specification |
|---|---|
| Catalogue product | Master Stream Nozzle — Variable Flow |
| Flow control | Operator-selectable discharge |
| Discharge description | Solid / straight stream |
| Application medium | Fresh water / fire water |
| Material options | Aluminium / gunmetal / stainless steel |
| Listed inlet sizes | 63 / 75 / 100 mm |
| Operating pressure | As specified for the selected model |
| Model-table pressure | 7 bar |
| Mounting | Compatible fire monitor |
The catalogue describes solid / straight-stream discharge. Confirm the required pattern control, material and monitor connection for the selected assembly.
MODEL SELECTION
Compare the
catalogue options.
Select the model reference with your required material, connection and operating arrangement.
On smaller screens, scroll across for all model details.
| Model | Flow rate / selections | Reference pressure |
|---|---|---|
| FIL/MSN-V/75 | 500 / 750 GPM | 7 bar |
| FIL/MSN-V/100 | 500 / 750 / 1000 GPM | 7 bar |
Model-table flows apply at 7 bar. Confirm the inlet, material and operating limits for the selected model; the table does not state a hydrostatic test pressure.
CONSTRUCTION
Inside the
assembly.
Components described in the matching product catalogue.
| Parameter | Specification |
|---|---|
| Body options | Aluminium / gunmetal / stainless steel |
| Flow control | Selectable internal flow-control arrangement |
| Inlet | Matched to the selected monitor and nozzle model |
APPLICATIONS
Specify for
the intended duty.
Application areas described in the catalogue. Final selection depends on the complete system and operating requirements.
- 01Oil & gas and petrochemical installations
- 02Refineries, tank farms and loading terminals
- 03Chemical and industrial facilities
- 04Marine, offshore and aviation facilities
OPERATION & INSPECTION
Prepare.
Inspect. Maintain.
Use the original catalogue and the instructions applicable to your selected assembly.
01Before use
Inspect the body, coupling, seals and discharge passage. Confirm the monitor support, connection, available supply and required model duty before introducing water.
02Operation
Introduce and close the supply gradually. Maintain the selected model’s permitted pressure and adjust a variable-flow control only as instructed.
03After use
Flush, drain and clean the nozzle. Inspect for damage and deposits; isolate and depressurise the assembly before servicing.
04Periodic service
Check seals, connections and any flow-control mechanism. Replace worn parts with approved spares and perform the required controlled functional checks.
DOCUMENTS & ENQUIRIES
Product literature.
Your next step.
Keep the original catalogue alongside the selected model and quotation.
Master Stream Nozzle — Variable Flow
Original Frozenfire catalogue
Specify your requirement
Include these details in your enquiry
- Required flow and available pressure at the nozzle
- Monitor outlet size, thread and mounting arrangement
- Water or foam duty, concentrate and proportioning arrangement
- Material, control configuration and quantity