Fixed-flow models
Four catalogue references provide defined flow rates at 7 bar.
The two photographs show different aluminium nozzle configurations. Confirm the control arrangement, fixed-flow model and connections with your quotation.
FROZENFIRE · Aqua Foam series
Aluminium Aqua Foam Nozzle
Aluminium construction. Fixed-flow foam delivery.
An aluminium Aqua Foam monitor nozzle with four fixed-flow references from 1000 to 3500 LPM at 7 bar.
AluminiumFixed flowLow-expansion foam
Discuss your requirement +91 7878 717 818PRODUCT OVERVIEW
The equipment.
Its application.
The aluminium Aqua Foam nozzle is a monitor-mounted water and foam nozzle with a defined discharge rate for each fixed-flow model. Select the nozzle with the monitor connection, concentrate and compatible proportioning arrangement.
The dedicated catalogue lists four fixed-flow models. The two existing product photographs show alternative aluminium control arrangements; confirm the required model and control configuration in the quotation.
Hard-anodised body
Aluminium alloy construction with a protective hard-anodised finish.
Matched foam system
Select the nozzle with the concentrate, proportioner and required monitor connection.
TECHNICAL SPECIFICATIONS
The details
for selection.
Specifications from the matching Frozenfire catalogue. Confirm the approved configuration for your project.
Download catalogue| Parameter | Specification |
|---|---|
| Product range | Aqua Foam — low-expansion foam nozzle |
| Flow arrangement | Fixed flow |
| Body material | Hard-anodised aluminium alloy |
| Internal component options | Aluminium / gunmetal |
| Operating pressure | 7–12 bar; recommended 7 bar |
| Maximum working pressure | 16 bar |
| Inlet connection | 2″ / 2½″ / 3″ / 4″ BSP thread |
| Foam expansion ratio | 6:1–10:1, concentrate and configuration dependent |
| Foam throw | Up to 40 m, model dependent |
| Foam compatibility | AFFF / AR-AFFF / FFFP / FP / protein foam; confirm system compatibility |
| Fasteners | Stainless steel |
| Bumper and seals | NBR rubber |
| Finish | Hard-anodised aluminium |
| Approximate weight | 2.5–5.0 kg, model dependent |
| Operating temperature | −10°C to +55°C |
| Mounting | Compatible fire monitor |
Confirm the selected nozzle construction and foam-system compatibility with the quotation. The catalogue uses both aspirating and non-aspirating descriptions; the approved configuration must define which applies.
MODEL SELECTION
Compare the
catalogue options.
Select the model reference with your required material, connection and operating arrangement.
On smaller screens, scroll across for all model details.
| Model | Flow rate | Reference pressure |
|---|---|---|
| FIL/AFN-F/50 | 1000 LPM | 7 bar |
| FIL/AFN-F/63 | 1750 LPM | 7 bar |
| FIL/AFN-F/75 | 2580 LPM | 7 bar |
| FIL/AFN-F/100 | 3500 LPM | 7 bar |
Flow, throw and expansion depend on the selected model, inlet pressure, concentrate, proportioning accuracy and operating conditions.
CONSTRUCTION
Inside the
assembly.
Components described in the matching product catalogue.
| Parameter | Specification |
|---|---|
| Body | Hard-anodised aluminium alloy |
| Internal components | Aluminium / gunmetal, as configured |
| Fasteners | Stainless steel |
| Bumper / seals | NBR rubber |
APPLICATIONS
Specify for
the intended duty.
Application areas described in the catalogue. Final selection depends on the complete system and operating requirements.
- 01Oil & gas and petrochemical installations
- 02Refineries, tank farms and loading terminals
- 03Chemical and industrial facilities
- 04Marine, offshore and aviation facilities
OPERATION & INSPECTION
Prepare.
Inspect. Maintain.
Use the original catalogue and the instructions applicable to your selected assembly.
01After use
Flush thoroughly with clean water, operate the applicable controls to remove residue, then drain and wipe dry.
02Monthly inspection
Check the body, connections, fasteners and passages for damage, leakage or obstruction.
03Quarterly checks
Carry out the prescribed functional check, inspect seals and clean internal passages. Lubricate only where required with a compatible lubricant.
04Annual service
Inspect internal components and replace worn parts. Complete the prescribed flow, foam and pressure checks following service.
DOCUMENTS & ENQUIRIES
Product literature.
Your next step.
Keep the original catalogue alongside the selected model and quotation.
Aluminium Aqua Foam Nozzle — Fixed Flow
Original Frozenfire catalogue
Specify your requirement
Include these details in your enquiry
- Required flow and available pressure at the nozzle
- Monitor outlet size, thread and mounting arrangement
- Water or foam duty, concentrate and proportioning arrangement
- Material, control configuration and quantity