Flexible handling
A lightweight, flexible hose construction for deployment and recovery.
Product photograph shows a representative hose assembly. Confirm the diameter, length, coupling and operating rating with your quotation.
FROZENFIRE · RRL HOSES RANGE
Canvas Hose Type-A
Flexible handling for water delivery.
A flexible canvas fire hose with a high-tenacity polyester jacket and a single layer of synthetic rubber lining. Designed for general firefighting, temporary water transfer and emergency water supply where handling and portability matter.
Type A · CanvasPolyester jacketSingle-layer rubber lining
Discuss your requirement +91 7878 717 818- Working pressure
- Up to 10–16 barCatalogue value; confirm the selected rating
- Burst pressure
- Up to 24 barBurst rating, not a working-pressure limit
- Standard sizes
- 6 sizes38, 50, 63, 70, 75, 100 mm
- Standard lengths
- 4 lengths7.5, 15, 20, 30 m
PRODUCT OVERVIEW
Easy to handle. Ready to deploy.
The Type A hose combines a circular-woven polyester jacket with a single layer of rubber lining. Its flexible construction supports rolling, storage and handling during general water-delivery duties.
The catalogue lists applications from brigade operations and emergency water supply to forestry, irrigation and construction sites. Choose the diameter, length, coupling material and pressure rating for the required assembly.
Woven reinforcement
High-tenacity polyester yarn forms the circular-woven jacket.
Rubber lining
One layer of synthetic rubber forms the inner lining.
Storage and transport
Designed for rolling and storage between uses.
TECHNICAL SPECIFICATIONS
Size. Pressure.
Construction.
Typical hose specifications from the Frozenfire catalogue, revision 07/2026.
Download technical catalogue| Parameter | Specification |
|---|---|
| Hose type | Type A |
| Construction | Canvas |
| Jacket material | Polyester |
| Inner lining | One layer synthetic rubber |
| Hose standard / marking | IS 636 · ISI mark stated in the catalogue |
| Standard sizes | 38, 50, 63, 70, 75, 100 mm |
| Standard lengths | 7.5, 15, 20, 30 m |
| Working pressure | Up to 10–16 bar |
| Burst pressure | Up to 24 bar |
| Temperature range | −10°C to +70°C |
| Coupling materials | Stainless steel / Gunmetal / Aluminium |
| Coupling standard / marking | IS 903 · ISI mark stated in the catalogue |
The catalogue gives typical specifications and “up to” pressure values. Confirm the working-pressure rating for the selected hose size and coupled assembly. Burst pressure is not the permitted operating pressure.
CONSTRUCTION & OPTIONS
Woven polyester. Single-layer rubber lining.
A circular-woven polyester jacket provides reinforcement around a single layer of synthetic rubber lining.
| Parameter | Specification |
|---|---|
| Jacket | High-tenacity polyester yarn |
| Weave | Circular-woven jacket |
| Inner lining | One layer synthetic rubber |
| Colour options | White / Yellow / Red / Blue, optional |
| Coupling material options | Stainless steel / Gunmetal / Aluminium |
Photographs show a representative hose and coupling configuration. Confirm the selected construction, coupling material and connection details with your quotation.
APPLICATIONS
Where the hose fits.
Application areas listed for this hose in the catalogue. Confirm the selected assembly for the required service and installation conditions.
- 01Fire brigade operations
- 02Water transfer
- 03Forestry firefighting
- 04Agriculture & irrigation
- 05Construction sites
- 06Emergency water supply
CONNECTION & USE
Connect. Deploy.
Recover.
Catalogue guidance for hose handling. Follow the instructions for the selected assembly and the installed firefighting equipment.
Inspect and connect
Inspect the hose and couplings before use. Connect securely to the hydrant valve, monitor or pump outlet and check that the couplings are properly locked.
Deploy and supply
Straighten the hose to prevent kinking and open the water supply gradually to avoid water hammer. Use the connected branch pipe or nozzle according to its instructions and the site procedure.
Drain and store
After use, close the water supply slowly, drain the hose completely, and clean and dry it before rolling and storage.
INSPECTION & MAINTENANCE
Keep the hose
ready for service.
Inspect the hose after each use and maintain the couplings, gaskets and locking mechanisms as part of the equipment maintenance programme.
01Inspection and fittings
- Inspect after each use for cuts, abrasion, punctures or other damage.
- Check couplings, gaskets and locking mechanisms regularly.
- Replace damaged hoses or couplings before returning the assembly to service.
02Cleaning and storage
- Wash with clean water after use, especially after exposure to chemicals, saltwater or foam concentrate.
- Dry completely before rolling and storing.
- Store in a cool, dry, well-ventilated place away from direct sunlight.
03Handling and periodic checks
- Avoid dragging the hose over sharp edges or rough surfaces.
- Carry out periodic hydrostatic pressure testing in accordance with the applicable standard and the selected hose rating.
- Confirm the relevant test procedure and pressure before testing the assembly.
DOCUMENTS & SUPPORT
Keep the hose details close.
Download the original Fire Hose Pipe catalogue for Type A, Type II and Type B, or request documents for your selected hose assembly.
Fire Hose Pipe catalogue
Original Frozenfire range document
Product descriptions, construction, typical specifications, applications, operating guidance and maintenance information.
Download catalogueYour selected configuration
Project documentation
Confirm the hose type, diameter, length, pressure rating, coupling material and connection details for the required assembly.
Request technical detailsDISCUSS YOUR REQUIREMENT
Specify the hose
for your project.
Share the hose type, diameter, length and quantity. Our team can review the operating requirement, coupling arrangement and product documentation.
Request a quotationFor a useful quotation
- 01Hose type, diameter and length
- 02Required working pressure and intended service
- 03Coupling material and connection details
- 04Quantity and delivery location
- 05Required marking, inspection and product documentation
Domestic supply & export
+91 7878 717 818