Stainless-steel construction
SS 304 / SS 316 body options with a natural stainless-steel polished finish.
Two catalogue configurations are shown. Confirm the selected body material, connection and arrangement with your quotation.
FROZENFIRE · SPRINKLERS
Foam Sprinkler
Controlled foam distribution. Fixed system integration.
A stainless-steel foam sprinkler for fixed foam-water systems. A dedicated deflector distributes pre-proportioned foam solution over the protected hazard.
Fixed foam-water systemsSS 304 / SS 316Pendent installation
Discuss your requirement +91 7878 717 818- Catalogue K-factor
- K-42unit convention to be confirmed
- Working pressure
- 2–12bar
- Test pressure
- 24bar
- Connection sizes
- ½″ / ¾″ / 1″BSP / NPT
PRODUCT OVERVIEW
Foam distribution.
Part of a complete system.
The Frozenfire Foam Sprinkler is a fixed discharge device for foam-water systems protecting flammable-liquid hazards. It receives foam solution through the piping network and distributes it through a specially designed deflector.
The catalogue describes stainless-steel SS 304 / SS 316 construction and pendent installation. Connection sizes and concentrate compatibility are selected to suit the system design.
A compatible proportioner mixes concentrate with water upstream of the sprinkler. The resulting foam application helps cover the fuel surface, cool it and suppress flammable vapours. Coverage and performance depend on the complete system and the selected concentrate.
Defined discharge characteristics
K-42 is the value tabulated in the catalogue. Confirm its unit convention and the selected model’s hydraulic data.
Concentrate selection
AFFF, AR-AFFF, FFFP, protein and fluoroprotein are listed, subject to compatibility with the selected system.
TECHNICAL SPECIFICATIONS
The details
behind the selection.
Review the catalogue values and confirm the selected configuration against your project requirements.
Download catalogue| Parameter | Catalogue specification |
|---|---|
| Product type | Foam sprinkler |
| Body material | Stainless steel SS 304 / SS 316 |
| Connection sizes | ½″, ¾″ and 1″ BSP / NPT |
| K-factor | K-42; unit convention not stated in the catalogue |
| Working pressure | 2–12 bar |
| Test pressure | 24 bar |
| Foam compatibility | AFFF, AR-AFFF, FFFP, protein and fluoroprotein; confirm selected concentrate compatibility |
| Installation | Pendent |
| Operating temperature | Up to 120°C (standard); this is not an activation temperature |
| Surface finish | Natural stainless-steel polish |
| System interface | Fixed foam-water network with separate proportioning equipment |
Confirm the selected configuration, hydraulic data and project documentation before specification. The operating-temperature value is not a thermal-release rating. Model-specific certification or listing documentation can be requested with your enquiry.
CONSTRUCTION
Body. Connection.
Discharge geometry.
Product construction and connection options from the catalogue.
Body & connection
Stainless-steel body with BSP / NPT connection options in the catalogue sizes.
Discharge deflector
Disperses the incoming foam solution into the intended discharge pattern.
Identification & finish
Natural stainless-steel polish; keep product identification markings legible for inspection and replacement.
WORKING PRINCIPLE
From system activation
to controlled discharge.
Understand the discharge device in the context of the complete fire-protection system.
Activate the system
Automatic detection or manual activation initiates the foam-water system.
Proportion upstream
The selected proportioning equipment mixes the specified concentrate with the water supply.
Distribute at the hazard
Solution travels through the fixed piping to the deflector for foam discharge over the protected area.
System activation and concentrate proportioning take place upstream. The catalogue does not establish an individual thermal-release mechanism for this foam sprinkler.
CONFIGURATION & ENQUIRIES
Define the requirement.
Select the configuration.
Share the installation and project requirements with our team.
Connections & hydraulics
Specify connection size and thread, required discharge and available supply pressure. Confirm the K-factor unit convention for hydraulic calculations.
Concentrate & hazard
Share the protected hazard, concentrate type, proportioner and proposed sprinkler arrangement.
Project documentation
Include quantity, drawings, required material, documentation requirements and delivery location.
Discuss a configuration
Share the connection, material, concentrate, hydraulic requirements, quantity and any required model-specific documentation.
OPERATION
Prepare. Operate.
Return to standby.
Catalogue guidance for use within the approved system operating procedure.
- 01
Before activation
Check concentrate stock, proportioner calibration, valve positions and water supply. Inspect sprinklers for damage and obstruction.
- 02
During operation
Operate through the approved foam-water system procedure. The upstream proportioner supplies solution to the fixed network and sprinkler deflectors.
- 03
After use
Safely isolate, flush residual solution with clean water, inspect sprinklers, replenish concentrate and restore standby after inspection and testing.
APPLICATIONS
Equipment for
industrial fire protection.
Application areas identified in the product catalogue; select the complete arrangement for the protected hazard.
- 01Aircraft hangars
- 02Petrochemical plants
- 03Oil & gas facilities
- 04Chemical processing plants
- 05Tank farms
- 06Loading & unloading bays
- 07Offshore platforms
- 08Marine installations
- 09Fuel storage areas
- 10Transformer protection
- 11Flammable-liquid warehouses
- 12Industrial process areas
INSPECTION & MAINTENANCE
Inspect the device.
Maintain the system.
Use these catalogue intervals within the facility’s approved inspection and maintenance programme. Isolate the system safely before maintenance.
01Monthly inspection
- Inspect for damage, corrosion and leakage.
- Keep the sprinkler clean and unobstructed; check threaded connections and identification markings.
02Quarterly inspection
- Verify water and concentrate availability and inspect proportioning equipment.
- Check piping supports and connections. Test alarm and detection interfaces where applicable.
03Annual maintenance
- Carry out the approved system performance test and verify discharge pattern, coverage, pressure and flow.
- Inspect and clean deflectors, replace damaged or excessively corroded sprinklers and flush the piping system.
- Check concentrate quality in accordance with its manufacturer’s recommendations.
DOCUMENTS & SUPPORT
Product information.
Ready for your project.
Download the original catalogue or request model-specific technical documentation.
Foam Sprinkler
Original Frozenfire catalogue
Product information, specifications, applications, operation and maintenance.
Download catalogue Open PDFComplete your specification
Product and project enquiries
Share the connection, material, concentrate, hydraulic requirements, quantity and any required model-specific documentation.
Request technical details