Frozenfire red stand post water monitor with silver jet nozzle, original nameplate, operating handle, locking levers and blue drain valve — Water monitor · catalogue viewFROZENFIRE

Photographed assembly. Select the model, materials, connections and accessories to suit your installation.

FROZENFIRE · WM SERIES

Stand Post Type Water Monitor

Manual direction. A fixed installation.

A manually operated stand post water monitor with a flanged base, threaded nozzle connection, independent directional controls and integrated drain valve.

Manual controlFlanged mountingWM series

Request a quotation Download catalogue

Discuss your requirement +91 7878 717 818

Typical flow range: 1000–3500 LPM
Typical pressure: 7–16 bar
Rotation: Approx. 360°
Typical elevation: −45° to +90°

Water Monitor catalogue values vary by model. Rotation may be continuous or limited according to the selected design.

PRODUCT OVERVIEW

Water delivery.
Manual control.

The Frozenfire stand post water monitor provides manual control of a water stream from a fixed flanged installation. The vertical riser and curved outlet arm carry water from the fire-water line to the selected monitor nozzle.

Separate horizontal and elevation controls position the discharge direction. Locking levers secure the selected position, while the drain ball valve supports drainage after testing or use.

The WM series catalogue lists four sizes from 50 to 100 mm. Choose the model, nozzle bore, body material and connection details together for the required water supply and installation.

Independent aiming

Manual horizontal rotation and vertical elevation controls.

Nozzle connection

Threaded outlet for the selected monitor nozzle.

Fixed base and drainage

Flanged mounting and an integrated drain ball valve.

TYPICAL TECHNICAL SPECIFICATIONS

Materials.
Connections. Control.

Typical specifications from the Stand Post Type Water Monitor catalogue, page 4, with WM model options shown separately below.

Download catalogue

Stand Post Type Water Monitor typical specifications
Parameter	Detail
Product type	Stand post type water monitor
Standard listed in catalogue	IS 8442, Type-I
Operation	Manual horizontal and vertical movement
Body material	Carbon steel / stainless steel
Swivel joint material	Stainless steel / gun metal
Nozzle material	Aluminium / stainless steel / gun metal
Nozzle bore options	26 / 32 / 38 / 45 mm
Finish	Hot dip galvanizing and red epoxy / polyester coating
Inlet connection	Flanged
Outlet connection	Threaded
Typical flow capacity	Approximately 1000–3500 LPM, model dependent
Typical operating pressure	7–16 bar (100–230 psi), model dependent
Horizontal rotation	Approximately 360°; continuous or limited, depending on design
Typical elevation range	−45° to +90°, model dependent
Media	Water
Drain valve	Integrated ball valve
Mounting	Fixed flange base

Select the required material and connection options with your quotation. The listed standard follows the catalogue; request applicable documentation for the selected model.

MODEL RANGE & PERFORMANCE

Model by model.
Ready to specify.

Four WM models and their water-jet figures, as listed on page 5 of the Water Monitor catalogue.

Scroll sideways to see the full table.

Stand Post Type Water Monitor catalogue model references
Model number	Size (mm)	Flow (LPM)	Water jet (m)
FIL/50/WM	50	1000	45
FIL/63/WM	63	1750	55
FIL/75/WM	75	2580	60
FIL/100/WM	100	3500	65

These are catalogue model references. Throw test conditions are not specified in the table; confirm the selected model, nozzle and supply conditions with your quotation.

Enquire FIL/50/WM Enquire FIL/63/WM Enquire FIL/75/WM Enquire FIL/100/WM

CONSTRUCTION & COMPONENTS

From the flanged base
to the nozzle.

Component and material options for the complete monitor assembly.

Stand Post Type Water Monitor construction
Parameter	Detail
Flanged base	Bolt-hole mounting flange for connection to the fire-water piping
Vertical riser	Supports the swivel assembly and carries the water supply
Curved outlet arm	Directs the waterway toward the nozzle outlet
Threaded outlet	Connection for the selected water, jet/fog, foam or long-range monitor nozzle
Operating handle	Manual left / right directional control
Elevation control	Side control for raising, lowering and holding the discharge angle
Locking mechanisms	Separate controls for horizontal and vertical positioning
Drain ball valve	Drains residual or trapped water from the monitor

WORKING PRINCIPLE

Supply.
Direction. Discharge.

How the monitor assembly carries and directs the firefighting media.

Water inlet

Water enters through the flanged base from the fire-water pipeline.

Waterway and nozzle

The supply passes through the vertical riser and curved outlet arm to the threaded nozzle connection.

Direction and position

Manual controls set azimuth and elevation, with locking handles securing the selected discharge direction.

APPLICATIONS

For industrial
fire protection.

Application areas described in the corresponding product catalogue.

01Oil and gas facilities
02Tank farms and refineries
03Chemical and industrial processing plants
04Power stations
05Aircraft hangars
06Warehouses
07Marine and LNG / LPG terminals
08Fire pump houses

MAINTENANCE

Care for the
complete assembly.

Routine care items listed on page 5 of the Water Monitor catalogue.

01Inspect for corrosion or coating damage
02Lubricate rotating joints
03Check locking mechanisms
04Test smooth movement in both axes
05Verify drain valve operation
06Inspect flange bolts and gaskets
07Carry out periodic flow tests
08Keep nozzle threads clean and undamaged

DOCUMENTS & SUPPORT

Product information.
Ready to reference.

Download the original catalogue, print this page or discuss your selected assembly.