Foam barrel configuration
Long barrel arrangement for concentrated foam discharge.
Photographed assembly. Select the model, materials, connections and accessories to suit your installation.
FROZENFIRE · WFM SERIES · FOAM BARREL
Water cum Foam Monitor with Foam Barrel
Aspirating barrel. Manual stream direction.
A manual stand post water cum foam monitor with a long foam barrel and pickup hose, available in three listed nozzle sizes from 63 to 100 mm.
Foam barrelManual controlWater / foam solution
Discuss your requirement +91 7878 717 818- Listed nozzle flow
- 1750–3500 LPM
- Operating pressure
- 7 kg/cm²
- Horizontal rotation
- 360°
- Vertical movement
- −45° to +90°
Foam barrel options on page 2 start at 63 mm / 1750 LPM. Capacities are listed at 7 kg/cm².
PRODUCT OVERVIEW
Water and foam.
Configured for the duty.
This configuration pairs the manual stand post monitor with a long foam barrel for a concentrated foam stream. The supplied photograph shows a yellow barrel with aspirating openings and a green pickup hose.
The catalogue lists three foam barrel sizes: 63, 75 and 100 mm, delivering 1750, 2580 and 3500 LPM respectively at 7 kg/cm². These options are distinct from the four-size Aqua Foam range.
The monitor uses manual horizontal and vertical controls, position locking and a flanged mounting connection. Confirm the selected barrel, concentrate, pickup arrangement and installation details with the quotation.
Three capacity options
63, 75 and 100 mm sizes at the catalogue-listed pressure.
Manual directional control
Lever-operated monitor movement and position locking.
TYPICAL TECHNICAL SPECIFICATIONS
Materials.
Connections. Control.
Typical specifications from the Stand Post Type Water cum Foam Monitor catalogue, page 6, with nozzle-specific options shown separately below.
Download catalogue| Parameter | Detail |
|---|---|
| Product type | Stand post type water cum foam monitor |
| Standard listed in catalogue | IS 8442, Type-I |
| Firefighting media | Water / foam solution |
| Body material | Mild steel / stainless steel |
| Swivel joint material | Stainless steel / gun metal |
| Foam barrel material | Aluminium |
| Listed nozzle sizes | 63 / 75 / 100 mm |
| Listed nozzle flow range | 1750–3500 LPM, size dependent |
| Operating pressure | 7 kg/cm² |
| Horizontal rotation | 360° continuous |
| Vertical movement | −45° to +90° |
| Inlet connection | 2½, 3 or 4 inch flanged, to match selected model |
| Outlet connection | Monitor nozzle connection |
| Operating method | Manual handle / lever operated |
| Finish | Epoxy primer with polyurethane Fire Red coating |
| Installation options | Fixed platform, skid mounting or mobile fire vehicle |
| Throw distance | Refer to the model references and confirm the selected nozzle duty |
Select the required material and connection options with your quotation. The listed standard follows the catalogue; request applicable documentation for the selected model.
MODEL RANGE & PERFORMANCE
Model by model.
Ready to specify.
WFM series references for the 63, 75 and 100 mm sizes listed for the foam barrel. The 50 mm Aqua Foam option is not included in this barrel range.
Scroll sideways to see the full table.
| Model number | Size (mm) | Flow (LPM) | Water jet (m) | Foam throw (m) |
|---|---|---|---|---|
| FIL/63/WFM | 63 | 1750 | 53 | 45 |
| FIL/75/WFM | 75 | 2580 | 60 | 50 |
| FIL/100/WFM | 100 | 3500 | 64 | 55 |
Throw figures are WFM series references, not confirmed barrel-specific performance. The matching rows on page 5 list foam throw of 45–55 m and water jet of 53–64 m; page 6 gives a general maximum of up to 50 m. Confirm the selected barrel and pressure before specifying throw.
CONSTRUCTION & COMPONENTS
From the flanged base
to the nozzle.
Component and material options for the complete monitor assembly.
| Parameter | Detail |
|---|---|
| Monitor body | Mild steel / stainless steel |
| Swivel joints | Stainless steel / gun metal |
| Controls | Manual horizontal and vertical levers; operating handle with grip |
| Position holding | Horizontal and vertical locking arrangement |
| Moving joints | Heavy-duty bearings and low-friction seals |
| Connections | Flanged inlet and monitor nozzle outlet |
| Drainage | Integrated drain valve |
| Hardware | Stainless steel fasteners and identification nameplate |
| Foam barrel | Aluminium |
Protective coating.
Catalogue coating system; confirm the finish selected for the supplied assembly.
| Parameter | Detail |
|---|---|
| Surface preparation | Abrasive blast cleaning |
| Primer option | Zinc-rich epoxy primer (optional) |
| Intermediate coating | High-build epoxy |
| Topcoat | Fire Red polyurethane, RAL 3000 / 3001 |
WORKING PRINCIPLE
Supply.
Direction. Discharge.
How the monitor assembly carries and directs the firefighting media.
Supply to the monitor
Water or foam solution enters through the flanged inlet and passes through the monitor waterway.
Direct the stream
Manual controls set horizontal direction and elevation; the locking arrangement holds the selected position.
Match the nozzle and concentrate
The selected Aqua Foam nozzle or foam barrel provides the discharge arrangement. Confirm concentrate compatibility, proportioning and supply conditions for the complete assembly.
APPLICATIONS
For industrial
fire protection.
Application areas described in the corresponding product catalogue.
- 01Oil refineries and tank farms
- 02Petroleum terminals and fuel loading facilities
- 03Chemical and solvent storage
- 04Aircraft hangars and aviation fuel depots
- 05Ship terminals and port facilities
- 06LNG / LPG terminals
- 07Power, steel and fertilizer plants
- 08Warehouses and industrial processing facilities
INSPECTION & TESTING
Checks before
dispatch.
Factory inspection activities listed on page 7 of the Water cum Foam Monitor catalogue.
- 01Hydrostatic pressure testing
- 02Dimensional inspection
- 03Rotation and elevation movement test
- 04Leak testing
- 05Flow performance verification
- 06Coating thickness inspection
- 07Visual quality inspection
- 08Functional operation test
DOCUMENTS & SUPPORT
Product information.
Ready to reference.
Download the original catalogue, print this page or discuss your selected assembly.
Stand Post Type Water cum Foam Monitor
Original Frozenfire catalogue
Original seven-page Water cum Foam Monitor catalogue. Page 2 identifies the three foam barrel capacity options; pages 5–6 provide series model references and typical specifications.
Download catalogue Open PDFSpecify your assembly
Product and project enquiries
Share the model, nozzle type, material, inlet connection, required flow and supply pressure. Include the quantity and delivery requirement.
Request technical detailsEXPLORE THE RANGE
More monitor configurations.
01 · WM SERIES
Stand Post Type Water Monitor
A manually operated stand post water monitor with a flanged base, threaded nozzle connection, independent directional controls and integrated drain valve.
- Flow range
- 1000–3500 LPM
- Control
- Manual
Specifications & PDFExplore
02 · WFM SERIES · AQUA FOAM
Water cum Foam Monitor with Aqua Foam
A manual stand post water cum foam monitor fitted with an Aqua Foam nozzle, with four listed nozzle sizes from 50 to 100 mm.
- Flow range
- 1000–3500 LPM
- Control
- Manual
Specifications & PDFExplore