Two hose connections
Two upper outlets for compatible 63 mm instantaneous firefighting hose couplings.
Catalogue configuration shown. Confirm the mating underground hydrant connection, hose couplings and included accessories.
FROZENFIRE · REMOVABLE STAND PIPE
Double Headed Stand Pipe
Two hose connections. One underground hydrant.
An aluminium-alloy stand pipe with two above-ground hose outlets, designed for connection to a compatible underground fire hydrant.
Aluminium alloyDouble outletRemovable connection
Discuss your requirement +91 7878 717 818- Hose outlets
- 02double headed
- Nominal size
- 63 mmhose connections
- Body
- Aluminiumalloy
- Installation
- Removableunderground hydrant
PRODUCT OVERVIEW
From the underground hydrant
to the hose line.
The Double Headed Stand Pipe provides two upper hose connections from one compatible underground hydrant connection. The long aluminium-alloy body and top handle arrangement support positioning and handling during deployment.
Both hose lines can be connected when required, subject to the underground hydrant’s available water supply and pressure. Metallic couplings and locking arrangements must be correctly matched and secured before the supply is established.
Practical handling
Aluminium-alloy construction and a top handle arrangement support positioning.
Repeated deployment
A removable assembly for inspected, correctly matched underground hydrant installations.
TECHNICAL SPECIFICATIONS
Construction.
Connections. Duty.
Specifications from the Aluminium Stand Pipe catalogue, matched to this outlet configuration.
NOMINAL SIZE63 mm
Download catalogue Two hose outlets with compatible instantaneous hose connections.
| Parameter | Specification |
|---|---|
| Product family | Aluminium stand pipe |
| Configuration | Double headed |
| Nominal size | 63 mm |
| Body material | Aluminium alloy |
| Outlet configuration | Double outlet |
| Inlet connection | Compatible underground hydrant connection |
| Outlet connections | 2 × compatible 63 mm firefighting instantaneous hose coupling |
| Coupling material | Aluminium / stainless steel / gun metal, as selected |
| Construction | Heavy-duty, lightweight construction |
| Finish | Protective finish with red-painted head, as applicable |
| Application | Underground hydrant firefighting systems |
| Operation | Manual installation and connection |
| Accessories | Couplings, caps and chains as applicable to the model |
| Operating pressure | Confirm for the selected model and hydrant system |
Confirm the exact hydrant connection, coupling standard, operating pressure, material grade and applicable certification for the selected model. The stand-pipe catalogue does not state a numerical working or test pressure.
CONFIGURATION & SELECTION
The details that
define your assembly.
Match the stand pipe to the underground hydrant, hose coupling and operating requirements.
Discuss a configuration
Share the underground hydrant connection, single or double outlet requirement, coupling details, operating pressure, quantity and delivery location. Include any required technical documentation.
OPERATION
Install. Connect.
Deploy the hose line.
Catalogue guidance for trained personnel following the applicable hydrant-system procedures.
- 01
Prepare the hydrant
Identify the compatible underground hydrant, clear access and inspect its connection for dirt, damage or obstruction.
- 02
Install the stand pipe
Position vertically and secure the bottom inlet to the hydrant outlet according to the coupling design.
- 03
Connect & check
Connect the required hose line or lines. Check that all couplings, seals, locks and hose connections are correctly secured.
- 04
Establish the supply
Operate the underground hydrant valve gradually with its designated equipment, following the hydrant manufacturer’s instructions.
- 05
Shut down safely
Gradually close the hydrant valve and relieve residual pressure. Disconnect only after confirming the equipment is depressurised.
- 06
Drain & store
Drain, inspect and clean the equipment before returning it to its designated storage location.
Avoid sudden valve operation. Secure hose connections before establishing flow and confirm that residual pressure has been relieved before disconnection.
APPLICATIONS
For the selected
fire-water arrangement.
Application areas listed in the product catalogue. Equipment selection remains subject to the site’s hydrant layout and duty.
- 01Industrial fire hydrant networks
- 02Commercial buildings & complexes
- 03Warehouses & logistics facilities
- 04Manufacturing plants & industrial estates
- 05Fire brigade & municipal operations
- 06Compatible underground hydrant installations
INSPECTION & MAINTENANCE
Inspect. Clean.
Keep ready for use.
Inspection and testing intervals follow the facility’s fire-safety maintenance schedule. Installation and removal must be carried out by trained personnel with the system depressurised.
01Routine inspection
- Inspect the aluminium body for cracks, dents or deformation.
- Check couplings, threads, locks, sealing washers, gaskets, retaining pins, chains and caps; keep connection points clean.
02Cleaning after use
- Flush dirt away with clean water and clean threads and sealing surfaces with a soft, non-abrasive brush.
- Avoid aggressive chemicals that could damage aluminium or the protective finish. Dry thoroughly before storage.
03Functional testing & lubrication
- Follow the facility’s inspection schedule and verify fit, secure locking and leak-free operation during an authorised water-flow test.
- Pressure-test only at the approved pressure and using the manufacturer’s prescribed procedure.
- Lubricate coupling or locking parts only where recommended, using a lubricant compatible with aluminium and seals.
04Storage & readiness
- Store clean and dry in an accessible location, protected from impact, contamination and corrosive chemicals.
- Fit caps where provided and keep equipment identifiable. Remove damaged equipment from service until inspected and approved for reuse.
DOCUMENTS & SUPPORT
Product literature.
Project-specific details.
Keep the original catalogue to hand, print this page or request information for your selected configuration.
Single / Double Headed Stand Pipe
Original Frozenfire catalogue
Aluminium single and double headed stand pipes. Connections, technical specifications, deployment and equipment care.
Download catalogue Open PDFSpecify your requirement
Product and project enquiries
Share the underground hydrant connection, single or double outlet requirement, coupling details, operating pressure, quantity and delivery location. Include any required technical documentation.
Request technical detailsEXPLORE THE FAMILY
