Venturi induction
A pressurised driving-water supply creates the induction effect used to draw water into the ejector.
Original supplied product photograph. Confirm the selected materials and connections with the quotation.
FROZENFIRE · WATER-DRIVEN PUMPS
Water Ejector Pump
Venturi water induction. A compact portable assembly.
A portable water-induction device that uses a pressurised water supply and the Venturi principle to draw water from static sources.
Venturi principleNo moving partsPortable
Model selection
Discuss your requirement +91 7878 717 818The catalogue provides representative specifications. Request confirmed technical data for your selected model.
- Operating principle
- Venturi jet
- Supply
- Pressurised water
- Construction
- No moving parts
- Handling
- Carrying handle
PRODUCT OVERVIEW
Water induction.
Portable deployment.
The Water Ejector Pump uses the Venturi jet principle to induce water flow from a static source when connected to a pressurised water supply. The catalogue describes water collection from ponds, tanks, rivers, wells and reservoirs for firefighting supply and transfer applications.
Its compact body incorporates a carrying handle for transport. The ejector operates without moving mechanical parts; the inlet, suction and outlet connections must be matched to the selected model and hose arrangement.
No moving parts
The jet-ejector principle provides water induction without a rotating impeller or mechanical drive within the unit.
Portable handling
The integrated handle and compact body support transport between water collection and transfer locations.
REPRESENTATIVE TECHNICAL SPECIFICATIONS
Review the details
for your duty.
The supplied catalogue identifies the following table as representative of typical firefighting ejector pumps. Final Frozenfire model specifications require confirmation.
Download catalogueRepresentative catalogue data
These are catalogue reference values, not confirmed ratings for a selected Frozenfire model. Confirm dimensions, flow rate, pressure rating, materials and coupling sizes before specifying the pump. Water induction capacity and maximum suction lift depend on the selected model and operating conditions.
| Parameter | Catalogue specification |
|---|---|
| Product name in catalogue | Ejector Pump |
| Body material | High-strength aluminium alloy / stainless steel |
| Surface finish | Fire-red epoxy powder coating |
| Inlet connection | 2½″ instantaneous fire hose coupling |
| Outlet connection | 4″ suction threaded connection |
| Suction inlet connection | 4″ suction threaded connection |
| Operating pressure | 5–10 bar |
| Maximum suction lift | Up to 7 m |
| Water induction capacity | Up to 1,800 L/min, model dependent |
| Connection sizes | 2½″ instantaneous and 4″ threaded |
| Operating temperature | 0°C to 60°C |
| Mechanical arrangement | No moving parts |
| Weight | Model dependent |
PROJECT CONFIGURATION
Specify the pump
with the full picture.
Share the water source, driving supply, connection requirements and intended duty with your enquiry.
Water supply and source
Share the available driving-water supply, source location, required induction capacity and suction arrangement.
Hose connections
Confirm the inlet coupling, suction thread and outlet thread against the mating hoses and selected model.
Model documentation
Request the selected pump’s dimensions, materials, pressure rating, flow data and operating instructions with the quotation.
Discuss this pump
Include the quantity, delivery location and any drawings or documentation requirements.
WORKING PRINCIPLE
Pressurised flow.
Venturi induction.
The ejector uses a pressurised water jet to induce flow from the connected water source.
Pressurised supply
A pressurised water source feeds the ejector’s driving-water inlet.
Venturi effect
The water jet creates the induction effect that draws water from the connected static source.
Combined discharge
The induced water and driving-water flow leave through the discharge connection for transfer.
APPLICATIONS
For water transfer
and emergency response.
Application areas described in the product catalogue. Confirm the selected equipment for the intended site conditions.
- 01Firefighting water induction
- 02Transfer from ponds, rivers, lakes & reservoirs
- 03Emergency flood-water removal
- 04Industrial firefighting systems
- 05Municipal fire departments
- 06Airport rescue & firefighting
- 07Marine & offshore firefighting
- 08Disaster response operations
DOCUMENTS & SUPPORT
Keep the product
information close.
Download the catalogue, print this page or request details for your selected pump.
Ejector Pump
Original Frozenfire catalogue
Two-page catalogue covering product features, application areas and a representative technical specification table. Request confirmed data for the selected model.
Download catalogue Open PDFDiscuss your requirement
Product and project enquiries
Share the pumping task, available water supply, required flow, connections, material preference and quantity. Our team can review the proposed configuration and supporting documentation.
Request technical details