Stainless-steel options
SS 304, SS 316 or SS 316L for the selected body and internals.
Product photograph shows a representative configuration. Confirm the selected material, size and connections with your quotation.
FROZENFIRE · Aqua Foam series
SS Aqua Foam Nozzle
Stainless construction. Defined foam duty.
A stainless-steel Aqua Foam nozzle with three fixed-flow models, SS 304 / 316 / 316L options and catalogue foam throw up to 45 m, depending on model.
SS 304 / 316 / 316LFixed flowMonitor mounted
Discuss your requirement +91 7878 717 818PRODUCT OVERVIEW
The equipment.
Its application.
The SS Aqua Foam nozzle combines stainless-steel body and internal-component options with fixed-flow monitor delivery. Three S-suffix model references list 1750, 2580 and 3500 LPM at 7 bar.
Select the stainless-steel grade and BSP inlet together with the foam concentrate and proportioning arrangement. The catalogue’s throw and expansion references depend on the model and operating conditions.
Three fixed-flow models
Dedicated 63S, 75S and 100S references with individual flow values.
Monitor integration
BSP threaded inlet options for the required monitor and foam system.
TECHNICAL SPECIFICATIONS
The details
for selection.
Specifications from the matching Frozenfire catalogue. Confirm the approved configuration for your project.
Download catalogue| Parameter | Specification |
|---|---|
| Product range | Aqua Foam — low-expansion foam nozzle |
| Flow arrangement | Fixed flow |
| Body material options | SS 304 / SS 316 / SS 316L |
| Internal components | SS 304 / SS 316 / SS 316L |
| Operating pressure | 7–12 bar; recommended 7 bar |
| Maximum working pressure | 16 bar |
| Inlet connection | 2½″ / 3″ / 4″ BSP thread |
| Foam expansion ratio | 6:1–10:1, concentrate and configuration dependent |
| Foam throw | Up to 45 m, model dependent |
| Foam compatibility | AFFF / AR-AFFF / FFFP / FP / protein foam; confirm system compatibility |
| Fasteners | Stainless steel |
| Bumper and seals | NBR rubber |
| Finish | Natural buff polish; confirm selected finish |
| Approximate weight | 2.5–5.0 kg, model dependent |
| Operating temperature | −10°C to +55°C |
| Mounting | Compatible fire monitor |
Confirm the selected nozzle construction and foam-system compatibility with the quotation. The catalogue uses both aspirating and non-aspirating descriptions; the approved configuration must define which applies.
MODEL SELECTION
Compare the
catalogue options.
Select the model reference with your required material, connection and operating arrangement.
On smaller screens, scroll across for all model details.
| Model | Size | Flow rate | Reference pressure |
|---|---|---|---|
| FIL/AFN-F/63S | 63 mm | 1750 LPM | 7 bar |
| FIL/AFN-F/75S | 75 mm | 2580 LPM | 7 bar |
| FIL/AFN-F/100S | 100 mm | 3500 LPM | 7 bar |
Flow, throw and expansion depend on the selected model, inlet pressure, concentrate, proportioning accuracy and operating conditions.
CONSTRUCTION
Inside the
assembly.
Components described in the matching product catalogue.
| Parameter | Specification |
|---|---|
| Body and internal options | SS 304 / SS 316 / SS 316L |
| Fasteners | Stainless steel |
| Bumper and seals | NBR rubber |
| Inlet | BSP threaded connection |
APPLICATIONS
Specify for
the intended duty.
Application areas described in the catalogue. Final selection depends on the complete system and operating requirements.
- 01Oil & gas and petrochemical installations
- 02Refineries, tank farms and loading terminals
- 03Chemical and industrial facilities
- 04Marine, offshore and aviation facilities
OPERATION & INSPECTION
Prepare.
Inspect. Maintain.
Use the original catalogue and the instructions applicable to your selected assembly.
01After use
Flush thoroughly with clean water, operate the applicable controls to remove residue, then drain and wipe dry.
02Monthly inspection
Check the body, connections, fasteners and passages for damage, leakage or obstruction.
03Quarterly checks
Carry out the prescribed functional check, inspect seals and clean internal passages. Lubricate only where required with a compatible lubricant.
04Annual service
Inspect internal components and replace worn parts. Complete the prescribed flow, foam and pressure checks following service.
DOCUMENTS & ENQUIRIES
Product literature.
Your next step.
Keep the original catalogue alongside the selected model and quotation.
SS Aqua Foam Nozzle — Fixed Flow
Original Frozenfire catalogue
Specify your requirement
Include these details in your enquiry
- Required flow and available pressure at the nozzle
- Monitor outlet size, thread and mounting arrangement
- Water or foam duty, concentrate and proportioning arrangement
- Material, control configuration and quantity