Marked positions
Closed, fog and jet settings on the pattern selector.
Product photographs show a representative configuration. Confirm the selected material and connections with your quotation.
FROZENFIRE · NOZZLE RANGE
Fog Nozzle
Select the jet. Shape the fog.
A manually operated 63 mm nozzle with CLOSED, FOG and JET positions, plus a compatible aluminium fog applicator described in the catalogue.
Jet / fog / closedManual controlApplicator option
Discuss your requirement +91 7878 717 818- Nominal size
- 63 mmConfirm the mating coupling
- Working pressure
- 7 barCatalogue reference
- Jet flow
- 500 LPMSolid jet head
- Fog flow
- 225 LPMDense fog head
PRODUCT OVERVIEW
Two patterns. One manual control.
The Fog Nozzle provides a concentrated jet or a dispersed fog pattern through a manually operated selector. Marked CLOSED, FOG and JET positions help the operator identify the required mode.
Gunmetal and stainless steel constructions are listed with a polished metallic finish. The catalogue also describes an aluminium applicator for low-velocity fog delivery, with a stated 225 LPM flow and 4.5 m range. Confirm the required applicator and coupling with the nozzle configuration.
Jet delivery
Concentrated water discharge from the solid jet head.
Fog delivery
Dispersed spray for suitable cooling and exposure-protection duties.
Applicator configuration
An aluminium fog applicator is described for compatible use.
TECHNICAL SPECIFICATIONS
The specification,
at a glance.
Product specifications from the Frozenfire catalogue, revision 07/2026.
Download technical catalogue| Parameter | Specification |
|---|---|
| Product type | Manually operated fog and jet nozzle |
| Nominal size | 63 mm |
| Catalogue standard reference | IS 952 |
| Control positions | CLOSED / FOG / JET |
| Construction | Gunmetal / stainless steel |
| Surface finish | Polished metallic finish |
| Working pressure | 7 bar |
| Solid jet head flow | 500 LPM |
| Dense fog head flow | 225 LPM |
| Applicator material | Aluminium |
| Applicator flow / range | 225 LPM / 4.5 m |
| Connection | Compatible 63 mm hose or outlet; coupling standard to be confirmed |
Confirm material grade, coupling and approved performance for the selected assembly. The 4.5 m range refers to the applicator, not the solid jet head. The closed position does not isolate the upstream supply.
MATERIALS & CONSTRUCTION
Manual selection in a metallic body.
The body, control handle and selector form the nozzle assembly; the catalogue describes a separate compatible fog applicator.
| Parameter | Specification |
|---|---|
| Body | Gunmetal / stainless steel |
| Control | Manual handle and pattern selector |
| Finish | Polished metal |
| Applicator | Aluminium; confirm supplied arrangement |
Material grade and coupling standard are selected with the approved product configuration.
APPLICATIONS
Where the nozzle fits.
Review the intended duty and installation requirements when selecting the product configuration.
- 01Industrial and manufacturing facilities
- 02Warehouses and commercial premises
- 03Fire tenders and response equipment
- 04Cooling exposed equipment and structures
- 05Compatible hydrant and hose systems
- 06Marine fog-applicator duties
OPERATING PRINCIPLE
How the nozzle works.
The selector changes the water discharge between a concentrated jet, dispersed fog and the closed position. Use the selected pattern according to the site operating procedure.
Closed
Stop nozzle discharge using the marked position.
Fog
Select a dispersed water pattern for the specified duty.
Jet
Select the concentrated water stream when appropriate to the application.
Before, during and after use.
Review the catalogue operating guidance with the instructions for your selected model and the applicable site procedures.
01Inspect & prepare
- Check the body, coupling, seals and free movement of the selector.
- Secure the compatible hose and establish stable footing before pressurising.
02Select & operate
- Open the supply gradually and maintain control of the hose reaction.
- Move the designated control to the required marked position without forcing it. Monitor pressure and discharge.
03Shutdown
- Follow the approved shutdown procedure, isolate upstream and relieve residual pressure.
- Never loosen a coupling while pressurised. Drain, inspect and clean after use.
INSPECTION & MAINTENANCE
Keep the nozzle
ready for service.
Inspect the waterway, connection and operating components as part of the equipment’s maintenance programme.
01After use
- Flush with clean water and clear discharge openings.
- Inspect the body, coupling, seals and selector, then drain and dry.
02Periodic service
- Check selector movement, handle security and sealing surfaces.
- Replace worn components with approved parts; lubricate only where specified.
03Testing & records
- Use a controlled arrangement for functional, leakage and flow checks.
- Record inspections and repairs. Remove defective equipment from service until cleared.
04Storage
- Store clean, dry and accessible, protected against impact and contamination.
- Keep the coupling and discharge openings clear.
DOCUMENTS & SUPPORT
Keep the product details close.
Download the original Frozenfire catalogue or request details for the configuration your project requires.
Fog Nozzle
Original product catalogue
Product description, technical specifications, applications, operating guidance and maintenance information.
Download catalogueProject documentation
For your selected configuration
Discuss the required material, inlet connection, hydraulic performance and supporting documents with our team.
Request technical detailsDISCUSS YOUR REQUIREMENT
Specify the nozzle
for your project.
Share the product, quantity and operating requirements. Our team can review the connection, material and configuration for your installation.
Request a quotationFor a useful quotation
- 01Product, quantity and material
- 02Required inlet connection
- 03Available pressure and required discharge
- 04Delivery location and supporting documentation
Domestic supply & export
+91 7878 717 818