Frozenfire hand control nozzle with a long silver-coloured body — Catalogue viewFROZENFIRE

Product photographs show a representative configuration. Confirm the selected material and connections with your quotation.

FROZENFIRE · NOZZLE RANGE

Hand Control Nozzle

Jet, spray and shut-off. Controlled from one lever.

A London Pattern hand control branch with a central operating lever, dual side grips and removable jet tips for a 63 mm hose connection.

London PatternThree operating modesGM / SS 304 / SS 316

Request a quotation Download catalogue

Discuss your requirement +91 7878 717 818

Inlet size: 63 mmInstantaneous male
Working pressure: 7 barCatalogue working pressure
Flow range: 225–450 LPMAt 7 bar
Jet throw: 25–30 mStraight-jet catalogue reference

PRODUCT OVERVIEW

Direct control at the branch.

The Hand Control Nozzle combines straight-jet delivery, a protective spray pattern and shut-off in a London Pattern branch. A centre-mounted lever selects the mode while the two side grips support controlled handling of the hose line.

The removable jet tip is available with 12, 16 or 20 mm orifices. Specify gunmetal or stainless steel construction together with the tip size and hose coupling required for the application.

Central control

Select jet, spray or shut-off using the operating lever.

Dual side grips

Side handles provide a stable hand position during discharge.

Removable jet tips

Choose 12, 16 or 20 mm orifices for the required duty.

Material options

Gunmetal and SS 304 / SS 316 with a polished finish.

TECHNICAL SPECIFICATIONS

The specification,
at a glance.

Product specifications from the Frozenfire catalogue, revision 07/2026.

Download technical catalogue

Hand Control Nozzle technical specifications
Parameter	Specification
Design	London Pattern, triple-position hand control
Catalogue standard references	IS 952 / BS 336
Inlet connection	63 mm instantaneous male
Removable jet tips	12 / 16 / 20 mm
Operating modes	Jet / spray / shut-off
Control mechanism	Central lever with dual side grips
Material options	Gunmetal / stainless steel 304 / 316
Finish	High polish
Working pressure	7 bar
Hydrostatic test pressure	21 bar
Flow rate	225–450 LPM at 7 bar
Effective jet throw	25–30 m, straight jet

Flow depends on the selected tip and water supply. The 21 bar hydrostatic test pressure is separate from the 7 bar working pressure.

MATERIALS & CONSTRUCTION

A lever-operated metallic branch.

The London Pattern assembly combines a metallic body, central control valve, removable tip and instantaneous male inlet.

Hand Control Nozzle construction
Parameter	Specification
Body	Gunmetal / SS 304 / SS 316
Control	Centre-mounted lever valve
Handling	Dual side stabilisation grips
Discharge tip	Removable threaded tip
Inlet	63 mm instantaneous male

Confirm the supplied material and tip size with the quotation.

APPLICATIONS

Where the nozzle fits.

Review the intended duty and installation requirements when selecting the product configuration.

01Marine and offshore firefighting
02Industrial hose systems
03Municipal fire services
04Chemical plant fire protection

OPERATING PRINCIPLE

How the nozzle works.

The central lever changes the internal flow path to produce a concentrated jet, a dispersed spray or a closed position.

Connect

Secure the compatible hose coupling with the supply isolated.

Select

Use the central lever to choose the marked operating mode.

Discharge

Maintain firm control using the side grips and open the supply gradually.

Before, during and after use.

Review the catalogue operating guidance with the instructions for your selected model and the applicable site procedures.

01Prepare

Inspect the inlet, locking shoulders and hose washer. Secure the coupling before pressurising.
Set the lever to shut-off and confirm that the hose team is ready.

02Control the discharge

Select jet or spray using the designated lever. Maintain a secure grip and stable footing.
Move the lever slowly when opening or closing to limit water hammer.

03Finish

Isolate the supply and relieve pressure before disconnecting or removing the tip.
Flush, drain and inspect the branch before storage.

INSPECTION & MAINTENANCE

Keep the nozzle
ready for service.

Inspect the waterway, connection and operating components as part of the equipment’s maintenance programme.

01After use

Flush with fresh water, particularly after saline or contaminated-water exposure.
With the supply isolated, inspect the tip and waterway for debris; clean with a soft brush.

02Monthly checks

Check free movement of the lever and inspect the coupling washer and seals.
Lubricate the specified pivots and moving parts with a compatible lubricant.

03Service & storage

Replace worn seals or damaged tips with suitable parts. Investigate stiffness or leakage before reuse.
Drain and keep the nozzle in a clean, dry equipment rack.

DOCUMENTS & SUPPORT

Keep the product details close.

Download the original Frozenfire catalogue or request details for the configuration your project requires.