360° discharge
A rotating discharge pattern around the nozzle.
Product photographs show a representative configuration. Confirm the selected material and connections with your quotation.
FROZENFIRE · NOZZLE RANGE
Revolving Nozzle
Hydraulic rotation. Distributed water coverage.
A hydraulically driven revolving nozzle for rotating water discharge, cooling and exposure protection in fixed fire-water installations.
360° rotating dischargeHydraulic operation
Discuss your requirement +91 7878 717 818- Inlet size
- 63 mmFlanged / coupling connection
- Discharge pattern
- 360°Rotating distribution
- Operating pressure
- 7–10 barConfirm for the selected model
- Flow rate
- 600–900 L/minModel and hydraulics dependent
PRODUCT OVERVIEW
Water-powered rotation. Wider distribution.
The Revolving Nozzle uses pressurised water to drive an internal rotating assembly. The revolving discharge distributes water around the nozzle for cooling, exposure protection and firefighting applications in industrial and commercial installations.
Gunmetal and stainless steel body options are listed for fixed or piping-mounted installations. Actual flow, rotation speed and coverage depend on the selected nozzle design and available hydraulic conditions; confirm the performance for the proposed installation.
Hydraulic drive
The water supply drives the rotating assembly without an external motor.
Material choice
Gunmetal or stainless steel construction options.
Fixed installation
Configured for fixed or piping-mounted fire-water systems.
TECHNICAL SPECIFICATIONS
The specification,
at a glance.
Product specifications from the Frozenfire catalogue, revision 07/26.
Download technical catalogue| Parameter | Specification |
|---|---|
| Product type | Rotating / revolving water nozzle |
| Application | Firefighting, cooling & exposure protection |
| Medium | Fire water / fresh water |
| Body material | Gunmetal / stainless steel |
| Internal mechanism | Precision-machined rotating assembly |
| Discharge pattern | Rotating / 360° distribution |
| Inlet connection | Flanged / coupling |
| Inlet size | 63 mm |
| Operating pressure | 7–10 bar |
| Flow rate | 600–900 L/min |
| Rotation | Automatic hydraulic rotation |
| Finish | Polished / natural / as specified |
| Seal material | Fire-service compatible sealing material |
| Mounting | Fixed / piping mounted |
| Operating position | As required by the installation design |
Flow rate, operating pressure, rotation speed and coverage depend on the specific nozzle design and hydraulic conditions. Confirm the final performance for the selected model; the catalogue does not specify a fixed coverage radius or rotation speed.
MATERIALS & CONSTRUCTION
A rotating assembly, driven by water.
A metallic body houses precision-machined internal passages and a rotating discharge assembly. The inlet and mounting arrangement must suit the installation.
| Parameter | Specification |
|---|---|
| Body | Gunmetal / stainless steel |
| Discharge assembly | Precision-machined rotating mechanism |
| Drive | Automatic hydraulic rotation |
| Seals | Fire-service compatible sealing material |
| Finish | Polished / natural / as specified |
| Installation | Fixed / piping mounted |
Confirm model-specific bearings, bushes, sealing materials and lubrication requirements with the selected supply.
APPLICATIONS
Where the nozzle fits.
Review the intended duty and installation requirements when selecting the product configuration.
- 01Oil & gas installations
- 02Refineries & petrochemical plants
- 03Chemical & process industries
- 04Tank farms
- 05Warehouses & storage facilities
- 06Industrial buildings
- 07Equipment cooling
- 08Fixed exposure-protection systems
OPERATING PRINCIPLE
How the nozzle works.
Pressurised water passes through the internal passages and drives the discharge assembly. Continuous rotation distributes the discharge around the nozzle.
Supply
Water enters through the secured inlet connection.
Rotate
Hydraulic force drives the internal rotating assembly.
Distribute
The rotating outlets spread the discharge across the protected area.
Before, during and after use.
Review the catalogue operating guidance with the instructions for your selected model and the applicable site procedures.
01Before use
- Inspect the body, inlet and discharge openings for damage or obstruction.
- Confirm secure installation and support, available water pressure and serviceable valves and piping. Keep personnel clear of the discharge area.
02During use
- Open the supply gradually and check that rotation begins with an even discharge.
- Monitor pressure, sticking, irregular movement and vibration. Do not dismantle or adjust the mechanism while pressurised.
03After use
- Close the supply gradually and depressurise the system completely.
- Inspect and flush with clean water where necessary; clear visible debris and dry the exterior.
INSPECTION & MAINTENANCE
Keep the nozzle
ready for service.
Inspect the waterway, connection and operating components as part of the equipment’s maintenance programme.
01Routine inspection
- Check the body, inlet, discharge openings, fasteners, seals and O-rings.
- Verify free rotation and inspect any bearings or bushes for wear, corrosion and excessive play.
02Cleaning
- Flush the inlet and discharge passages with clean water as needed.
- Use non-abrasive cleaning methods. Do not damage precision openings with sharp tools or incompatible chemicals.
03Rotating mechanism & lubrication
- Check for scale, deposits, worn bearings or bushes and damaged seals. Replace worn parts and verify free rotation after reassembly.
- Lubricate only where specified for the particular model. Do not lubricate water-lubricated or self-lubricating components without model-specific approval.
04Storage
- Keep clean and dry; protect openings from dust and polished surfaces from physical damage.
- Before installation after storage, inspect the nozzle and confirm that the rotating mechanism moves freely.
TROUBLESHOOTING
Check the cause.
Review the mechanism.
Use these catalogue checks during inspection. Isolate and depressurise the nozzle before dismantling or internal maintenance.
| Symptom | Possible cause | Catalogue action |
|---|---|---|
| No rotation | Blocked passage or insufficient pressure | Check the water supply and clean internal passages. |
| Slow rotation | Low pressure or worn rotating components | Verify pressure and inspect the mechanism. |
| Uneven discharge | Blocked outlet | Clean the discharge openings. |
| Leakage | Damaged seal or loose connection | Inspect the seal and connection; replace or secure as required. |
| Excessive vibration | Worn bearing / bush or obstruction | Inspect the rotating assembly. |
| Reduced flow | Blocked or restricted inlet | Check the inlet and internal passages. |
| Irregular spray pattern | Damaged discharge components | Inspect and replace damaged components. |
DOCUMENTS & SUPPORT
Keep the product details close.
Download the original Frozenfire catalogue or request details for the configuration your project requires.
Revolving Nozzle
Original product catalogue
Product description, technical specifications, applications, operating guidance and maintenance information.
Download catalogueProject documentation
For your selected configuration
Discuss the required material, inlet connection, hydraulic performance and supporting documents with our team.
Request technical detailsDISCUSS YOUR REQUIREMENT
Specify the nozzle
for your project.
Share the product, quantity and operating requirements. Our team can review the connection, material and configuration for your installation.
Request a quotationFor a useful quotation
- 01Quantity, body material and inlet connection
- 02Required flow and available pressure
- 03Mounting position and protected area
- 04Performance documentation and delivery needs
Domestic supply & export
+91 7878 717 818