Hose outlets & pumper inlet
A double-headed hose arrangement with an additional fire-appliance connection.
Catalogue configuration shown. Material, connections, height and accessories are confirmed with your quotation.
FROZENFIRE · FIXED STAND POST
Double Headed Stand Post with Pumper Connection
Hose delivery. Fire-appliance connection.
A double-headed hydrant stand post combining hose outlets with a pumper inlet for a compatible fire appliance to supplement the fire-water supply.
Double headedPumper connectionNon-return arrangement
Discuss your requirement +91 7878 717 818- Hose outlets
- 02double-headed model
- Hose outlet size
- 63 mm2½″ instantaneous
- Pumper inlet
- 100 / 150 mmselected configuration
- Installation
- Fixedabove ground
PRODUCT OVERVIEW
A fixed outlet.
Ready for connection.
This stand post combines the two hose outlets of a double-headed hydrant with an additional fire-brigade pumper connection. A compatible fire appliance can connect to the inlet to supplement the water supplied to the hydrant system.
The model section specifies a carbon-steel body, stainless-steel valve spindles, renewable bronze seats and a built-in non-return valve arrangement. The inlet size, pumper arrangement and mating coupling are selected for the installation.
Non-return arrangement
The built-in non-return valve arrangement controls reverse flow through the pumper connection.
Serviceable construction
Carbon-steel body, stainless-steel spindles and renewable bronze valve seats.
TECHNICAL SPECIFICATIONS
Construction.
Connections. Duty.
Model features and typical range data from the Fire Hydrant Stand Post catalogue.
HOSE OUTLET SIZE63 mm
Download catalogue Two hose outlets with compatible instantaneous hose connections.
| Parameter | Specification |
|---|---|
| Product family | Fire hydrant stand post |
| Body material | Carbon steel — as specified in this model’s feature section |
| Hydrant valve material | Stainless steel / gun metal, as selected |
| Hose outlets | 2 × 63 mm (2½″) instantaneous |
| Inlet connection | Flanged; ANSI / IS drilling as selected |
| Stand post height | 600 mm typical; customised height available |
| Working pressure | Up to 16 bar — typical range value* |
| Hydrostatic test pressure | Up to 24 bar — typical range value* |
| Operation | Manual handwheel |
| Flow direction | Straight through |
| Finish | Fire-red epoxy powder coating / epoxy finish as applicable |
| Installation | Fixed, vertical, above ground |
| Temperature range | −10°C to +80°C — typical range value* |
| Outlet protection | Blank caps with retaining chains |
| Pumper inlet size | 100 mm (4″) or 150 mm (6″), as required |
| Pumper arrangement | 2-way or 4-way arrangement, subject to the approved assembly |
| Pumper inlet cap | Stainless steel / gun metal female round-threaded blank cap with chain |
| Backflow control | Built-in non-return valve arrangement |
| Valve spindle | Stainless steel |
| Valve seat | Renewable bronze |
* These are typical stand-post range specifications. Confirm the final material, height, connections, working pressure, test pressure and temperature limits against the selected configuration. Hydrostatic test pressure is not the operating pressure.
CONFIGURATION & SELECTION
The details that
define your assembly.
Discuss these range options with your enquiry. The final assembly and supplied accessories follow the agreed configuration.
This page presents the double-headed model. The catalogue also lists alternative two- or four-way arrangements. Confirm the final hose outlets, pumper arrangement and inlet size on the approved assembly drawing.
Discuss a configuration
Share the outlet arrangement, body and valve materials, inlet flange details, required height, operating pressure, quantity and delivery location. Include the installation drawing where available.
OPERATION
Connect. Control.
Return to standby.
Catalogue guidance for trained personnel following the applicable hydrant-system procedures.
- 01
Inspect the assembly
Check the stand post, valves and accessible connections before use. Ensure the operating area and hose route are clear.
- 02
Connect the hose
Remove the outlet cap and securely connect a compatible hose. Check the coupling engagement and hose arrangement.
- 03
Open gradually
Operate the handwheel gradually in the indicated opening direction and regulate the water supply for the required duty.
- 04
Close & restore
Close gradually after use. Confirm that residual pressure has been relieved before disconnecting, replace caps and check for leakage.
Pumper connection
A compatible fire appliance connects to the selected pumper inlet to supplement the fire-water supply. Verify the coupling and non-return arrangement, and follow the approved fire-appliance and site operating procedure.
Avoid sudden valve operation. Secure hose connections before establishing flow and confirm that residual pressure has been relieved before disconnection.
APPLICATIONS
For the selected
fire-water arrangement.
Application areas listed in the product catalogue. Equipment selection remains subject to the site’s hydrant layout and duty.
- 01Industrial fire-protection systems
- 02Oil & gas facilities
- 03Refineries & petrochemical plants
- 04Chemical industries
- 05Airports
- 06Marine & offshore installations
- 07Warehouses
- 08Power & steel plants
- 09Commercial buildings
- 10Municipal hydrant networks
- 11Mining industries
INSPECTION & MAINTENANCE
Maintain access.
Check the assembly.
Follow the catalogue schedule together with the site’s maintenance programme. Isolate and depressurise before servicing; never dismantle a pressurised hydrant.
| Activity | Frequency |
|---|---|
| Visual inspection | Monthly |
| Operational check | Quarterly |
| Flushing & cleaning | Every 6 months |
| Lubrication | Every 6 months or as required |
| Pressure & flow test | Annually |
| Complete overhaul | Every 3–5 years or as required |
01Monthly inspection
- Keep access clear; inspect the body, bonnet, outlets and flange for damage, corrosion or coating deterioration.
- Check caps, chains, visible leakage and the legibility of identification plates.
02Quarterly operational checks
- Check smooth valve movement and inspect the spindle, gland packing and external fasteners.
- Clean outlet connections and apply suitable lubricant only where required.
03Half-yearly servicing
- Flush and clean under the approved site procedure; check unobstructed discharge and sealing after closure.
- Inspect caps, gaskets and seals, and repair damaged protective coating.
04Annual inspection & testing
- Inspect mechanical components and replace worn seals or parts as required.
- Lubricate appropriate moving parts with suitable waterproof grease, avoiding excess.
- Arrange pressure and flow testing using the approved test procedure and rating, then verify correct operation and closure.
05Pumper connection checks
- Inspect the inlet coupling, cap, chain and gasket for damage or deterioration.
- Verify correct non-return valve operation and carry out a connection test with compatible fire-brigade equipment.
DOCUMENTS & SUPPORT
Product literature.
Project-specific details.
Keep the original catalogue to hand, print this page or request information for your selected configuration.
Fire Hydrant Stand Post
Original Frozenfire catalogue
Single headed, double headed and pumper-connection stand posts. Features, typical specifications, operation and maintenance.
Download catalogue Open PDFSpecify your requirement
Product and project enquiries
Share the outlet arrangement, body and valve materials, inlet flange details, required height, operating pressure, quantity and delivery location. Include the installation drawing where available.
Request technical detailsEXPLORE THE FAMILY
