Single hose connection
One 63 mm (2½″) instantaneous outlet for a compatible firefighting hose.
Catalogue configuration shown. Material, connections, height and accessories are confirmed with your quotation.
FROZENFIRE · FIXED STAND POST
Single Headed Stand Post
One hose outlet. A permanent connection.
A fixed above-ground fire hydrant stand post with a single 63 mm instantaneous hose outlet and a manually operated screw-down valve.
Single outlet63 mm instantaneousFixed installation
Discuss your requirement +91 7878 717 818- Hose outlets
- 01single headed
- Outlet size
- 63 mm2½″ instantaneous
- Operation
- Manualhandwheel
- Installation
- Fixedabove ground
PRODUCT OVERVIEW
A fixed outlet.
Ready for connection.
The Single Headed Stand Post provides an accessible hose connection from a permanently connected underground fire-water main. Its single-outlet arrangement is intended for installations requiring one firefighting hose line at the selected location.
The screw-down valve provides manual control and shut-off. A renewable seat, non-rising spindle and chained outlet cap support routine operation, inspection and servicing. Body and valve materials are selected for the specified installation.
Serviceable valve
Screw-down control, a renewable valve seat and non-rising spindle.
Protected assembly
Fire-red epoxy finish with an outlet blank cap and retaining chain.
TECHNICAL SPECIFICATIONS
Construction.
Connections. Duty.
Model features and typical range data from the Fire Hydrant Stand Post catalogue.
HOSE OUTLET SIZE63 mm
Download catalogue One hose outlet with compatible instantaneous hose connections.
| Parameter | Specification |
|---|---|
| Product family | Fire hydrant stand post |
| Body material | Carbon steel / stainless steel, as selected |
| Hydrant valve material | Stainless steel / gun metal, as selected |
| Hose outlets | 1 × 63 mm (2½″) instantaneous |
| Inlet connection | Flanged; ANSI / IS drilling as selected |
| Stand post height | 600 mm typical; customised height available |
| Working pressure | Up to 16 bar — typical range value* |
| Hydrostatic test pressure | Up to 24 bar — typical range value* |
| Operation | Manual handwheel |
| Flow direction | Straight through |
| Finish | Fire-red epoxy powder coating / epoxy finish as applicable |
| Installation | Fixed, vertical, above ground |
| Temperature range | −10°C to +80°C — typical range value* |
| Outlet protection | Blank caps with retaining chains |
* These are typical stand-post range specifications. Confirm the final material, height, connections, working pressure, test pressure and temperature limits against the selected configuration. Hydrostatic test pressure is not the operating pressure.
CONFIGURATION & SELECTION
The details that
define your assembly.
Discuss these range options with your enquiry. The final assembly and supplied accessories follow the agreed configuration.
Discuss a configuration
Share the outlet arrangement, body and valve materials, inlet flange details, required height, operating pressure, quantity and delivery location. Include the installation drawing where available.
OPERATION
Connect. Control.
Return to standby.
Catalogue guidance for trained personnel following the applicable hydrant-system procedures.
- 01
Inspect the assembly
Check the stand post, valves and accessible connections before use. Ensure the operating area and hose route are clear.
- 02
Connect the hose
Remove the outlet cap and securely connect a compatible hose. Check the coupling engagement and hose arrangement.
- 03
Open gradually
Operate the handwheel gradually in the indicated opening direction and regulate the water supply for the required duty.
- 04
Close & restore
Close gradually after use. Confirm that residual pressure has been relieved before disconnecting, replace caps and check for leakage.
Avoid sudden valve operation. Secure hose connections before establishing flow and confirm that residual pressure has been relieved before disconnection.
APPLICATIONS
For the selected
fire-water arrangement.
Application areas listed in the product catalogue. Equipment selection remains subject to the site’s hydrant layout and duty.
- 01Industrial fire-protection systems
- 02Oil & gas facilities
- 03Refineries & petrochemical plants
- 04Chemical industries
- 05Airports
- 06Marine & offshore installations
- 07Warehouses
- 08Power & steel plants
- 09Commercial buildings
- 10Municipal hydrant networks
- 11Mining industries
INSPECTION & MAINTENANCE
Maintain access.
Check the assembly.
Follow the catalogue schedule together with the site’s maintenance programme. Isolate and depressurise before servicing; never dismantle a pressurised hydrant.
| Activity | Frequency |
|---|---|
| Visual inspection | Monthly |
| Operational check | Quarterly |
| Flushing & cleaning | Every 6 months |
| Lubrication | Every 6 months or as required |
| Pressure & flow test | Annually |
| Complete overhaul | Every 3–5 years or as required |
01Monthly inspection
- Keep access clear; inspect the body, bonnet, outlets and flange for damage, corrosion or coating deterioration.
- Check caps, chains, visible leakage and the legibility of identification plates.
02Quarterly operational checks
- Check smooth valve movement and inspect the spindle, gland packing and external fasteners.
- Clean outlet connections and apply suitable lubricant only where required.
03Half-yearly servicing
- Flush and clean under the approved site procedure; check unobstructed discharge and sealing after closure.
- Inspect caps, gaskets and seals, and repair damaged protective coating.
04Annual inspection & testing
- Inspect mechanical components and replace worn seals or parts as required.
- Lubricate appropriate moving parts with suitable waterproof grease, avoiding excess.
- Arrange pressure and flow testing using the approved test procedure and rating, then verify correct operation and closure.
DOCUMENTS & SUPPORT
Product literature.
Project-specific details.
Keep the original catalogue to hand, print this page or request information for your selected configuration.
Fire Hydrant Stand Post
Original Frozenfire catalogue
Single headed, double headed and pumper-connection stand posts. Features, typical specifications, operation and maintenance.
Download catalogue Open PDFSpecify your requirement
Product and project enquiries
Share the outlet arrangement, body and valve materials, inlet flange details, required height, operating pressure, quantity and delivery location. Include the installation drawing where available.
Request technical detailsEXPLORE THE FAMILY
